1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Gen 3 facelift.

Discussion in 'Gen 3 Prius Main Forum' started by Padraig, Nov 10, 2019.

  1. Padraig

    Padraig New Member

    Joined:
    Oct 4, 2019
    14
    2
    0
    Location:
    Ireland
    Vehicle:
    2010 Prius
    Model:
    III
    Hi. I know the gen 3 Prius came out around 2009. I know some early gen 3’s had inverter issues.

    Did the gen 3 get a facelift?
    If so when...and is it possible to identify? (Different interior etc)
    Did the facelift fix the inverter issue? (I think I’ve heard mentioned it may have been sorted in 2014)
     
  2. bisco

    bisco cookie crumbler

    Joined:
    May 11, 2005
    107,693
    48,945
    0
    Location:
    boston
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    a facelift is not the same as updated mechanicals. they did the body face lift in the 2012 u.s. model year.
    mechanical/electric issues were hit or miss. i don't recall inverter issues. there was a recall for the diodes inside to prevent burnout from high electrical draw, which could cause the car to stall at high speed

    a bigger concern is egr clogging and oil burning

    they updated the rings in 14 and pistons in 15
     
  3. Padraig

    Padraig New Member

    Joined:
    Oct 4, 2019
    14
    2
    0
    Location:
    Ireland
    Vehicle:
    2010 Prius
    Model:
    III
    Thanks. Any way to tell the ‘body’ facelift in 2012.
    So one would nearly want to get a 2015 Prius to be sure of it not running in to issues?
     
    #3 Padraig, Nov 10, 2019
    Last edited: Nov 11, 2019
  4. bisco

    bisco cookie crumbler

    Joined:
    May 11, 2005
    107,693
    48,945
    0
    Location:
    boston
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    15 would be your best bet, but more costly, naturally.

    one obvious facelift is two exposed cupholders in the console, vs one before the facelift
     
  5. BZzap!

    BZzap! Senior Member

    Joined:
    Jun 13, 2012
    1,607
    877
    0
    Vehicle:
    2012 Prius
    Model:
    Two
    The 2012 Face lift (front Bumper cover) consisted of a tapered or sculptured Day time running light change.
     
  6. Padraig

    Padraig New Member

    Joined:
    Oct 4, 2019
    14
    2
    0
    Location:
    Ireland
    Vehicle:
    2010 Prius
    Model:
    III
    hi

    but would you know this from just looking at the car in an ad. Just looking for obvious ways to tell.

    2 x cup holders is one way, any others ?
     
    #6 Padraig, Nov 11, 2019
    Last edited: Nov 11, 2019
  7. elementnomore

    elementnomore Member

    Joined:
    Sep 5, 2013
    136
    44
    0
    Location:
    Los Angeles
    Vehicle:
    2012 Prius
    Model:
    Four
    Taillights changed in 2012
     
  8. jfschultz

    jfschultz Active Member

    Joined:
    Mar 15, 2004
    635
    114
    0
    Location:
    Germantown, TN
    Vehicle:
    2013 Prius Plug-in
    Model:
    Plug-in Base
    That is the most obvious. They went from a red section at the top to ski shapes along the outside edge.
     
  9. Mendel Leisk

    Mendel Leisk Senior Member

    Joined:
    Oct 17, 2010
    54,663
    38,207
    80
    Location:
    Greater Vancouver, British Columbia, Canada
    Vehicle:
    2010 Prius
    Model:
    Touring
    Pistons in 14, rings in 15.

    Think what would be logical, then it's the inverse.
     
    bisco likes this.
  10. bisco

    bisco cookie crumbler

    Joined:
    May 11, 2005
    107,693
    48,945
    0
    Location:
    boston
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    Thanks, I’ll never remember (n)
     
    Mendel Leisk likes this.
  11. Grit

    Grit Senior Member

    Joined:
    Aug 22, 2017
    6,112
    4,039
    1
    Location:
    Wilkes Land
    Vehicle:
    2012 Prius
    Model:
    Four
    Cosmetic updates doesn't fix any electrical existing issues. If it did fix the inverter over-heating issue, I'd slap on a 2014 front bumper on mine.
     
    #11 Grit, Nov 11, 2019
    Last edited: Nov 11, 2019
    Mendel Leisk likes this.
  12. Mendel Leisk

    Mendel Leisk Senior Member

    Joined:
    Oct 17, 2010
    54,663
    38,207
    80
    Location:
    Greater Vancouver, British Columbia, Canada
    Vehicle:
    2010 Prius
    Model:
    Touring
    That's like me and @ChapmanF : there's a couple of brake components on the firewall, I can never remember the name of either; he always comes along to sort it out.
     
  13. Mendel Leisk

    Mendel Leisk Senior Member

    Joined:
    Oct 17, 2010
    54,663
    38,207
    80
    Location:
    Greater Vancouver, British Columbia, Canada
    Vehicle:
    2010 Prius
    Model:
    Touring
    IIRC, there's something inside the inverter housing, which Toyota says is not considered part of the inverter, for warranty purposes. You can't make this stuff up, lol.

    (I sometimes wonder if I'm sailing a little close to the wind, considering Toyota maybe has some sponsorship status on this site. But how can it be slander, just stating info that's their public record? :whistle:)

    Here we go:

    IPM Extended Warranty (Canada?) | PriusChat
     
  14. elementnomore

    elementnomore Member

    Joined:
    Sep 5, 2013
    136
    44
    0
    Location:
    Los Angeles
    Vehicle:
    2012 Prius
    Model:
    Four
    So my inverter blew up or died, don't ask me the engine code... All I know is that one morning the car wouldn't start in the garage. I had it towed to my local dealer...And because 'I had done all the software updates' on my 2012 (I think 2 of them) they replaced the inverter the dealer said. This happened about a year ago and I am under 100K if that all helps you some.
     
    AltraStache, bisco and Mendel Leisk like this.
  15. Mendel Leisk

    Mendel Leisk Senior Member

    Joined:
    Oct 17, 2010
    54,663
    38,207
    80
    Location:
    Greater Vancouver, British Columbia, Canada
    Vehicle:
    2010 Prius
    Model:
    Touring
    Cautionary tale for refuseniks?
     
    elementnomore likes this.
  16. elementnomore

    elementnomore Member

    Joined:
    Sep 5, 2013
    136
    44
    0
    Location:
    Los Angeles
    Vehicle:
    2012 Prius
    Model:
    Four
    I am not sure if the dealer was trying to pull something on me, they didn't say THEY pushed for it but the car was fixed... I like my 2012 but am getting itchy for all the safety features of the newer Gen4 so mine might go up for sale. Car has been completely reliealable up until that issue. 98K, same brake pads...
     
    AltraStache likes this.
  17. Prodigyplace

    Prodigyplace Senior Member

    Joined:
    Nov 1, 2016
    11,696
    11,317
    0
    Location:
    Central Virginia
    Vehicle:
    2017 Prius
    Model:
    Two
    I know there were mechanical updates to the 2015 Prius v to improve the front offset crash test results. My son has a 2015 Prius v.
     
  18. Mendel Leisk

    Mendel Leisk Senior Member

    Joined:
    Oct 17, 2010
    54,663
    38,207
    80
    Location:
    Greater Vancouver, British Columbia, Canada
    Vehicle:
    2010 Prius
    Model:
    Touring
    For the fourth gen's, I'm mostly just bilious...

    I like a lot of the under-the-skin stuff, but the dash, interior in general, not so much. Exterior, it looks like something that escaped from Disneyland.
     
    AltraStache and Attila Fekete like this.