1. Attachments are working again! Check out this thread for more details and to report any other bugs.

2013 Suspension

Discussion in 'Gen 3 Prius Care, Maintenance & Troubleshooting' started by Kiiing, Jul 1, 2021.

  1. Kiiing

    Kiiing Junior Member

    Joined:
    Apr 19, 2015
    7
    2
    0
    Location:
    Brooklyn, NY
    Vehicle:
    2013 Prius
    Model:
    Two
    Hi everyone,


    I own a 2013 with approximately 160k miles. I'm looking to change out the front struts and springs. I'm going with the KYB full assembly. Is there anything else that I might as well replace or should be replacing? Any tips would be highly appreciated. Thanks in advance
     
  2. tankyuong

    tankyuong Senior Member

    Joined:
    Nov 9, 2012
    1,555
    659
    0
    Location:
    Central MO
    Vehicle:
    2012 Prius c
    Model:
    II
    Stabilizer links and possibly strut boots
     
    Paul E. Highway likes this.
  3. tweedle99

    tweedle99 Member

    Joined:
    Feb 7, 2012
    98
    55
    0
    Location:
    Round Rock, TX
    Vehicle:
    2010 Prius
    Model:
    III
    Stabilizer bar bushings. I would also change out the Strut mounts
     
    Paul E. Highway likes this.
  4. SB6

    SB6 Member

    Joined:
    Jan 27, 2019
    314
    69
    0
    Location:
    Texas
    Vehicle:
    2010 Prius
    Model:
    II
    The KYB assembly comes with new mounts, no?
     
  5. bluhawk

    bluhawk Junior Member

    Joined:
    Aug 24, 2015
    23
    33
    10
    Location:
    Torrance, CA
    Vehicle:
    2015 Prius
    Model:
    II
    and strut boots, no?
     
    SB6 likes this.
  6. tweedle99

    tweedle99 Member

    Joined:
    Feb 7, 2012
    98
    55
    0
    Location:
    Round Rock, TX
    Vehicle:
    2010 Prius
    Model:
    III
    Depends on how you buy them? If you order as an assembly then yes which also comes w/ new springs. If just the strut, then no.
    .
    Just checked Rockauto, Strut itself is $72, as assembly $148
     
  7. ASRDogman

    ASRDogman Senior Member

    Joined:
    May 29, 2018
    5,837
    3,137
    0
    Location:
    Florida
    Vehicle:
    2010 Prius
    Model:
    Two
    It will cost less to buy the complete assembly then parting it out. I've already checked.
    If you only buy the strut, you're intalling it with an old bearing, bumper stop, plactic guard, which both
    are usually torn up, and an old spring. Springs do weaken.
    Then you have to take it apart, and put it back together. Which takes a lot of time.
    Easier and faster to remove the old one, install the new one with all new parts.
     
    tweedle99 and Mendel Leisk like this.
  8. Paul E. Highway

    Paul E. Highway Active Member

    Joined:
    Mar 7, 2020
    198
    126
    0
    Location:
    Hawaii
    Vehicle:
    2010 Prius
    Model:
    Four
    I bought the ‘complete KYB front strut assembly’ from 1A Auto and the strut mount was not KYB, they subbed cheaper unit, instead of heavy duty rubber on top it had flimsy felt tape. I had ordered the KYB mounts earlier intending to use original spring but returned them when I decided to go the complete assembly route to save time.

    Made me wonder what spring they used! They also shipped the two units in a huge box without padding or bubble wrap so the 2 units bounced around in box all the way to Hawaii.

    Spending my Prius $$$ elsewhere since.
     
  9. ASRDogman

    ASRDogman Senior Member

    Joined:
    May 29, 2018
    5,837
    3,137
    0
    Location:
    Florida
    Vehicle:
    2010 Prius
    Model:
    Two
    Are you sure they were kyb?
    I've been disapointed with 1a auto. They are too expensive. And slow.

     
  10. Paul E. Highway

    Paul E. Highway Active Member

    Joined:
    Mar 7, 2020
    198
    126
    0
    Location:
    Hawaii
    Vehicle:
    2010 Prius
    Model:
    Four
    Struts were definitely KYB.
     
  11. ASRDogman

    ASRDogman Senior Member

    Joined:
    May 29, 2018
    5,837
    3,137
    0
    Location:
    Florida
    Vehicle:
    2010 Prius
    Model:
    Two
    But you said the strut mounts weren't kyb???
     
  12. Paul E. Highway

    Paul E. Highway Active Member

    Joined:
    Mar 7, 2020
    198
    126
    0
    Location:
    Hawaii
    Vehicle:
    2010 Prius
    Model:
    Four
    Correct, the actual strut was KYB, the mount at top was not, and I have my doubts about the spring.
     
  13. ASRDogman

    ASRDogman Senior Member

    Joined:
    May 29, 2018
    5,837
    3,137
    0
    Location:
    Florida
    Vehicle:
    2010 Prius
    Model:
    Two
    That's weird. Seems if you get a complete strut from KYB, it would be the whole thing.
    Maybe they just took the strut and used whatever they had to make a complete strut....

     
  14. tweedle99

    tweedle99 Member

    Joined:
    Feb 7, 2012
    98
    55
    0
    Location:
    Round Rock, TX
    Vehicle:
    2010 Prius
    Model:
    III
    RockAuto is my go to source. They can be a few bucks more but at least they'll back their products.
     
  15. Kiiing

    Kiiing Junior Member

    Joined:
    Apr 19, 2015
    7
    2
    0
    Location:
    Brooklyn, NY
    Vehicle:
    2013 Prius
    Model:
    Two
    Is it the KYB SR4246 & SR4245? This is what I plan on getting. Thanks

    Can you tell me which stabilizer links would be best ? Should I go with OEM?

    Which brand would be best for the stabilizer bar bushings?
     
    #15 Kiiing, Jul 9, 2021
    Last edited by a moderator: Jul 9, 2021
  16. Paul E. Highway

    Paul E. Highway Active Member

    Joined:
    Mar 7, 2020
    198
    126
    0
    Location:
    Hawaii
    Vehicle:
    2010 Prius
    Model:
    Four
    I got Moog stabilizer links, reasonable price and have grease fitting at each end. I shoot a little grease in there when I rotate tires. Also, I used the OEM bushings.
     
    douglasjre and Kiiing like this.
  17. tweedle99

    tweedle99 Member

    Joined:
    Feb 7, 2012
    98
    55
    0
    Location:
    Round Rock, TX
    Vehicle:
    2010 Prius
    Model:
    III
    The part numbers look right for the strut assembly

    Rockauto 5% off Expires Aug. 8, 2021

    175744774109682775

    I went w/ Moog bushing too since i was buying from Rockauto anyway. No need to runaround.

    Make sure you clean the bar very well
     
  18. Kiiing

    Kiiing Junior Member

    Joined:
    Apr 19, 2015
    7
    2
    0
    Location:
    Brooklyn, NY
    Vehicle:
    2013 Prius
    Model:
    Two
    I went with mevotech stabilizer links. They were a little bite more, but I seemed to have found better reviews on them. I couldn't find the OEM bushings so, I went with Moog. Just hoping these parts hold up as well as the OEM.

    I just placed my order. I found a code online, but used yours instead. I went with the Moog bushing. Pretty solid website. I was able to pick up a cardone wiper motor, too. Price was cheaper than anywhere else.
     
    tweedle99 likes this.
  19. douglasjre

    douglasjre Senior Member

    Joined:
    Sep 13, 2008
    1,743
    613
    0
    Location:
    Orlando, FL
    Vehicle:
    2010 Prius
    Model:
    ----USA----
    Why would you change the strut mounts and why would you not change the sway bar links