My Prius camper- a mini hotel on wheels!

Nice setup!

I would suggest moving the + connection for the inverter from the bolt where you have attached it, just to the nearby bolt that is on the other side of the battery fuse. (It's behind a little spot where the plastic of that fuse/connector housing folds out.)



Here's what that looked like in my old Gen 1 (where the same style fuse/connector housing was used). The cover flap is folded open in the photo so you can see the connection.



Connecting at that recommended spot means you've got the battery fuse between your inverter wiring and the battery, and also, at the far forward end under the hood, the DC/DC converter fuse between your wiring and the car's converter. That makes it a well-protected spot.

It also means that when you are running the inverter and the car is READY (which I hope is pretty much always, right?), because your inverter's power is coming from the DC/DC converter then and not from the battery, you just have the voltage drop of one fuse on that power path, rather than two.

 

This is amazing. Never saw the Prius as a camper.

 

What did I just watch? Is it really possible?

 

The beauty of the Prius is climate control all night long and completely stealth -- park anywhere.

 

I didn't know it was a thing, either! small and mighty!

 

Wow, that's awesome! I also haven't tried camping on my Prius. It's worth learning this from you.

 

I cannot for the life of me figure out how to get the black plastic cover off of the positive terminal assembly on my Gen 2 to get at the bolt that you're referring to underneath. Does anyone know how to get at it without destroying it? Right now I have my inverter connected directly to the positive terminal (I just removed the red cover). That's how I've seen it done everywhere else, but if there is a better way, I'd definitely switch to it!

 

On my Gen 1 (I bet Gen 2's is pretty similar), on the side of that black plastic body was a flap that is just clipped closed over that bolt. It's 'hinged' at one side (the way they do 'hinged' for little plastic flaps, just very thin plastic where it folds over) and there's a little squeeze-to-release deal at the far edge.

There wasn't any big neon sticker on it saying "OPEN HERE", but just looking at it for a minute or two thinking "there was surely a way they accessed the bolt for assembly..." did the trick for me.

 

Would a Prime be a better option for heating instead of turning the engine on at interval to warm up the cabin?

 

Your video was one of the ones that inspired me to get my Prius

 

Your video was one of the ones that inspired me to get my Prius

 

Your video was one of the ones that inspired me to get my Prius