1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Unplug EGR Valve

Discussion in 'Gen 3 Prius Care, Maintenance & Troubleshooting' started by Paladain55, Oct 20, 2021.

Page 2 of 2
  1. Paladain55

    Paladain55 Active Member

    Joined:
    Oct 20, 2021
    379
    143
    0
    Location:
    The South
    Vehicle:
    2010 Prius
    Model:
    Two
    I consider it permanently fixed now so that's why. No more cleaning egr. I know there are some rule sticklers here who prefer to have the system fully functioning as intended but it still takes a couple hours to clean that crap. Now I never have to ever again. Lol
    I did clean the manifold though and it got it fully functioning, but then unplugged it again. At least if I sell it it won't have a cel for the next owner. So there ya go that's my findings with the egr system.
     
    #21 Paladain55, Jan 8, 2022
    TheMainePrius likes this.
  2. Caleb Stoll

    Caleb Stoll New Member

    Joined:
    Feb 9, 2022
    1
    0
    0
    Location:
    Warsaw OH
    Vehicle:
    2012 Prius
    Model:
    Three
    Are you saying you can run the car with egr unplugged and you don’t get the cel symbol coming on? Could you explain the process in detail?
     
    #22 Caleb Stoll, Feb 9, 2022
  3. StarCaller

    StarCaller Senior Member

    Joined:
    Feb 15, 2014
    1,246
    697
    0
    Location:
    Cedar Crest, NM, USA
    Vehicle:
    2014 Prius
    Model:
    Two
    people just ignore it /
     
    #23 StarCaller, Feb 9, 2022
  4. Paladain55

    Paladain55 Active Member

    Joined:
    Oct 20, 2021
    379
    143
    0
    Location:
    The South
    Vehicle:
    2010 Prius
    Model:
    Two
    Yes you get a cel code. I just ignore it. Check my scan Guage on occasion to make sure it's not any other codes. We aren't in limp mode and the car runs smooth still. I think this mod makes the gen 3 prius more reliable like the gen 2 prius.
     
    #24 Paladain55, Feb 12, 2022
  5. ChapmanF

    ChapmanF Senior Member

    Joined:
    Mar 30, 2008
    24,192
    15,751
    0
    Location:
    Indiana, USA
    Vehicle:
    2010 Prius
    Model:
    IV
    It also retards the ignition timing.
     
    #25 ChapmanF, Feb 12, 2022
  6. mjoo

    mjoo Senior Member

    Joined:
    Nov 9, 2016
    1,128
    1,317
    12
    Location:
    Michigan
    Vehicle:
    2010 Prius
    Model:
    III
    I don't want a retarded Prius.

    moto g power ?
     
    #26 mjoo, Feb 12, 2022
    Raytheeagle and Mendel Leisk like this.
  7. Paladain55

    Paladain55 Active Member

    Joined:
    Oct 20, 2021
    379
    143
    0
    Location:
    The South
    Vehicle:
    2010 Prius
    Model:
    Two
    Update: We have hit 200k. I've figured out oil consumption is mostly just tied to RPMs. Oil consumption was not affected by swapping viscosity either. 0w-40 consumed like 0w-20. I found that the car consumes oil above 3000 RPMs usually on long highway trips and its very hill/mountain-ey here. Keeping RPMs below 3000 RPM car consumes a quart of 0w-20 every 6500 miles. EGR is unplugged. Still getting around 54 mpg average for now. So we don't have a bad head gasket but we do have bad piston rings. I replaced the spark plugs back around 120k but I will probably do them again here soon and attempt to do a leak-down test as well. Past that the car still drives very well. Somewhat respectable. Oh and I still have p0401. I haven't noticed any limp mode effects or extra CEL codes.
     
    #27 Paladain55, Mar 3, 2022
    GG707 likes this.
  8. Paladain55

    Paladain55 Active Member

    Joined:
    Oct 20, 2021
    379
    143
    0
    Location:
    The South
    Vehicle:
    2010 Prius
    Model:
    Two
    *above code is p0403 not p0401
     
    #28 Paladain55, Nov 14, 2022
  9. ChapmanF

    ChapmanF Senior Member

    Joined:
    Mar 30, 2008
    24,192
    15,751
    0
    Location:
    Indiana, USA
    Vehicle:
    2010 Prius
    Model:
    IV
    Driving around with the timing constantly retarded is a kind of a "limp mode effect", just maybe not severe enough that you notice it.
     
    #29 ChapmanF, Nov 14, 2022
  10. rjparker

    rjparker Tu Humilde Sirviente

    Joined:
    Jun 6, 2008
    8,030
    4,758
    7
    Location:
    Texas Hill Country
    Vehicle:
    2012 Prius v wagon
    Model:
    Three
    It would seem this whole discussion is purely academic if the cooler was 100% plugged anyway. Unless the real issue is a leaky egr valve at low rpms which causes a bad idle or misfire and perhaps gets mechanically sealed off by the owner. We know the egr valve should be closed at startup and low engine power.
     
    #30 rjparker, Nov 14, 2022
  11. Paladain55

    Paladain55 Active Member

    Joined:
    Oct 20, 2021
    379
    143
    0
    Location:
    The South
    Vehicle:
    2010 Prius
    Model:
    Two
    The car does run a different map by the way so you are correct. Its like a fail safe running mode. The biggest difference i see is the amount of load the engine uses at each rpm is different than running with EGR connected.
     
    #31 Paladain55, Nov 14, 2022
    TheMainePrius likes this.
  12. mattf1a

    mattf1a New Member

    Joined:
    Yesterday
    1
    0
    0
    Location:
    Southern CA
    Vehicle:
    2014 Prius v wagon
    Model:
    Three
    I have a question about Disabling the EGR valve: If my engine gives me rough shuddering accelerations when starting from a stop, but it runs smooth at driving speed, and if I disable the EGR by unplugging the harness and then the engine runs smoothly in all conditions, does that mean that there is nothing wrong with my head gasket? Forgot to state that I have a 2014 Prius V with 162000 miles and have never had a problem with it until the rough acceleration thing started a couple months ago.
     
    #32 mattf1a, Aug 2, 2024 at 10:35 PM
(You must log in or sign up to post here.)
Page 2 of 2