1. Attachments are working again! Check out this thread for more details and to report any other bugs.

For Sale 2005 (Gen 2) Cardone Right CV Axle $50

Discussion in 'Private Sales' started by Desert Flier, Mar 22, 2022.

Tags:
  1. Desert Flier

    Desert Flier Member

    Joined:
    Oct 30, 2019
    65
    39
    0
    Location:
    Phoenix
    Vehicle:
    2005 Prius
    Model:
    N/A
    I have a slightly used right CV Axle made by Cardone. It is in excellent condition with less than 5,000 miles on it. It was was replaced while trying to locate a suspension noise that ended up being an engine mount.

    $50 local pickup in the Phoenix Metro area. PXL_20220322_201713661.jpg
     
    #1 Desert Flier, Mar 22, 2022
  2. JC91006

    JC91006 Senior Member

    Joined:
    Nov 10, 2013
    16,468
    8,383
    0
    Location:
    Los Angeles, CA
    Vehicle:
    2008 Prius
    Model:
    II
    So after 5000 miles, you removed this and put back the old part that you didn't throw out?
     
    #2 JC91006, Mar 22, 2022
  3. Desert Flier

    Desert Flier Member

    Joined:
    Oct 30, 2019
    65
    39
    0
    Location:
    Phoenix
    Vehicle:
    2005 Prius
    Model:
    N/A
    Close. I had replaced all of the suspension and rubber components on the front end but noticed a clack when accelerating. I thought I had it narrowed down to the right front axle. I put about 5,000 miles on the car while troubleshooting. So I pulled this Cardone unit back off and put on a NAPA unit. The noise was still there. I could have returned the NAPA unit but I just didn't feel like messing with it. So the Cardone with less than 5K on it is in the NAPA box in my garage. I bought the Cardone through Rock Auto originally. I ended up using portable magnetic microphones and attached them in various places and finally discovered that the issue was an engine mount all along. Hope that explains it better .
     
    #3 Desert Flier, Mar 22, 2022
    SFO likes this.
  4. JC91006

    JC91006 Senior Member

    Joined:
    Nov 10, 2013
    16,468
    8,383
    0
    Location:
    Los Angeles, CA
    Vehicle:
    2008 Prius
    Model:
    II
    Not sure if you've attempted to replace the engine mount yet, but it's a PITA
     
    #4 JC91006, Mar 22, 2022
    SFO likes this.
  5. SFO

    SFO Senior Member

    Joined:
    Feb 7, 2017
    5,286
    4,225
    0
    Location:
    Northern California
    Vehicle:
    2007 Prius
    Model:
    N/A
    Which engine mount were either of you talking about?
     
    #5 SFO, Mar 24, 2022
  6. Desert Flier

    Desert Flier Member

    Joined:
    Oct 30, 2019
    65
    39
    0
    Location:
    Phoenix
    Vehicle:
    2005 Prius
    Model:
    N/A
    The one under the inverter was a pain. Also change the dog bone at the same time.
     
    #6 Desert Flier, Apr 7, 2022
    SFO likes this.
  7. Desert Flier

    Desert Flier Member

    Joined:
    Oct 30, 2019
    65
    39
    0
    Location:
    Phoenix
    Vehicle:
    2005 Prius
    Model:
    N/A
    The one under the inverter is a real PIA. I also change the dog bone at the same time. That one is significantly easier and is located on the bottom.
     
    #7 Desert Flier, Apr 7, 2022
(You must log in or sign up to post here.)