1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Gen 1 Plug-in Kill Switch

Discussion in 'Gen 1 Prius Plug-in 2012-2015' started by prEEus4848, May 26, 2022.

Tags:
  1. prEEus4848

    prEEus4848 New Member

    Joined:
    May 26, 2022
    1
    0
    0
    Location:
    Portland
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    Hi all,

    Has anyone successfully put a kill switch on a gen 1 plug-in? I've got a 2012 plug-in that I need to put a kill switch on (moving to a *very* high theft area) and I've read through a lot of threads, but none specifically for a plug-in model.

    This thread suggests using starter kill in conjunction with an alarm, which seems like a good idea, though I couldn't quite follow all the technical details.

    This thread suggests isolating the brake pedal switch with a killswitch, so the car couldn't go into ready until the killswitch is closed.

    Neither of these were for a plug-in model, and I don't know that either of these were actually implemented or successful.

    Anyone have any success stories or suggestions? Thanks!
     
    #1 prEEus4848, May 26, 2022
  2. QuantumFireball

    QuantumFireball Active Member

    Joined:
    Mar 22, 2016
    416
    267
    0
    Location:
    Ireland
    Vehicle:
    2012 Prius Plug-in
    Does it really make much sense for a modern car with an immobiliser? If they really want it they're either going to break into your home and steal the keys, or just put it on a flatbed.
     
    #2 QuantumFireball, Jun 15, 2022
  3. bisco

    bisco cookie crumbler

    Joined:
    May 11, 2005
    107,686
    48,936
    0
    Location:
    boston
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    you can use the same technique from any gen 3 if you can find one, they are all the same.
     
    #3 bisco, Jun 15, 2022
(You must log in or sign up to post here.)