1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Horn Constantly Sounding

Discussion in 'Gen 3 Prius Care, Maintenance & Troubleshooting' started by Roscorsese, Nov 9, 2021.

  1. Roscorsese

    Roscorsese New Member

    Joined:
    Nov 9, 2021
    2
    0
    0
    Location:
    London
    Vehicle:
    2010 Prius
    Model:
    N/A
    Hi all,

    First time posting. I have a 2010 Prius, roughly 150k miles. Saturday night after having just returned from a short drive I was sitting in the car, parked, but with the car still running. Suddenly the horn starting blaring. Not honking, sounding constantly at full volume (it was 11pm so I woke up the whole street). It sounded constantly like this until I figured out how to unplug the fuse box. I could not simply turn the car off to stop the problem.

    Things I have done since:
    • I checked the fuse box. It was not the alarm system as I removed that fuse and plugged the box back in only to have the horn immediately begin sounding again.
    • I removed the horn fuse and that stopped the problem, however the horn fuse is connected with several other systems so I can't just remove only that fuse. The fuse didn't appear to be blown, but maybe I don't know what I'm looking at.
    • I opened the steering wheel (safely with the battery disconnected) and checked that the plastic tabs that you depress to make contact with the horn were all still in place.

    My current solution is that I have directly disconnected the horns at the horn itself, and now I can plug everything back in and drive just without being able to use the horn.

    Mechanic (without having taken anything apart to check) thinks replacing the clock spring might fix the problem. It's a cheap replacement part aftermarket so I'm not too bothered by trying that solution, but does anyone else have any ideas here?

    Additional details: Earlier that same day, we visited friends outside of the city and ended up needing to drive down a bumpy and muddy path. The brakes have been squealing at low speeds since then.
     
  2. jimontheocean

    jimontheocean Member

    Joined:
    Jul 1, 2020
    53
    46
    5
    Location:
    SC
    Vehicle:
    2010 Prius
    Model:
    Two
    I know this is an old post, but did you ever find a solution. I just had this happen to me.
    I checked the steering wheel horn mechanism and it is fine.
    Clockspring replaced and it still happens.
     
    douglasjre likes this.
  3. Eddie25

    Eddie25 Active Member

    Joined:
    Dec 31, 2018
    371
    139
    0
    Location:
    IL
    Vehicle:
    2011 Prius
    Model:
    III
    Check to see if the horn switch circuit is getting grounded out somewhere. If you can find any of those connectors and disconnect them you could narrow it down. 1G might be a pain to get to, I feel like it's in the integration relay, but that's what I'd be trying to get to first (I've never done it). If pin 18 is grounded towards the steering wheel then it's probably the clock spring or switch and if it's grounded towards the integration relay then it's probably the integration relay.

    How did you test the switch?

    horn.JPG horn2.JPG