2012 Prius V Errors after car wash

While I am no stranger to unfortunate coincidence, I am hoping this is one. I went through. A car wash with car in neutral and engine running.
the car gave me a “your car is rolling in neutral idiot, put it in park.” Then the car went into power off/ accessory made with a power steering error light on the dashboard.
I coasted out, restated the car and pulled into a parking space. I turned off the car, waited a minute and restarted.
The power steering light was gone but now I had both ABS lights, the check engine, and the hybrid error. I used my Veepeak OBD2 and Car Scanner.


Car Scanner ELM OBD2
DTC report
Selected brand: Toyota
VIN: ************

============1==============
P0A80
Raw code: 0A80
ECU: 7EA
Status: Confirmed
Hybrid battery pack Deterioration

============2==============
P3000
Raw code: 3000
ECU: 7EA
Status: Confirmed
High Voltage Battery Fault; HV Battery Malfunction

============3==============
C1259
Raw code: 5259
ECU: ABS control unit #2
Status: Confirmed

============4==============
C1310
Raw code: 5310
ECU: ABS control unit #2
Status: Confirmed

============5==============
P0A80
Raw code: 0A80
ECU: Hybrid engine system
Status: Confirmed
Hybrid battery pack Deterioration

============6==============
P3000
Raw code: 3000
ECU: Hybrid engine system
Status: Confirmed
High Voltage Battery Fault; HV Battery Malfunction

I drove it a few miles, parked and I am still getting the hybrid and check engine lights. I haven’t tried resetting them yet.

Did I get water in the computer or sensors?

 

Update. ABS lights all went away. Check engine and hybrid remain.