Toyota Engine Oil

Discussion in 'Gen 2 Prius Care, Maintenance and Troubleshooting' started by gen2prius, Aug 11, 2022.

  1. gen2prius

    gen2prius Member

    Joined:
    Jan 28, 2015
    94
    27
    0
    Location:
    Sydney, Australia
    Vehicle:
    2008 Prius
    Model:
    i-Tech
    That's a good tip, thank you.
     
  2. gen2prius

    gen2prius Member

    Joined:
    Jan 28, 2015
    94
    27
    0
    Location:
    Sydney, Australia
    Vehicle:
    2008 Prius
    Model:
    i-Tech
    Finally did another oil change, I know should have done it sooner. 13,000km or 8,000mi over 3 years.

    Indeed the previous washer was present, the second washer also stuck on there. This time I'm 100% sure because I put one there last time.

    Using an open ended wrench did the trick, sort of pry from the centre.

    washers.jpg
     
  3. gen2prius

    gen2prius Member

    Joined:
    Jan 28, 2015
    94
    27
    0
    Location:
    Sydney, Australia
    Vehicle:
    2008 Prius
    Model:
    i-Tech
    Used an oil extractor this time, the manual version, it was quick and easy even without an air compressor.

    It was able to extract 3L of oil through the dip stick tube. Probably can do more if the front wheels weren't on ramps. No oil came out from the drain hole, so it is not less effective than draining.

    Such a blessing for cars with top mounted oil filters, still great help for Prius.
     
    VelvetFoot likes this.