after 4 new plugs and an injector . . . .

Discussion in 'Gen 2 Prius Main Forum' started by lexidium, Oct 10, 2025 at 2:05 PM.

  1. lexidium

    lexidium Active Member

    Joined:
    Nov 19, 2015
    294
    136
    0
    Location:
    manchester
    Vehicle:
    2008 Prius
    Model:
    N/A
    Had a slight misfire on cylinder one so fitted a new injector and changed the four plugs at the same time.
    Now it runs ok for a while and then rattles and wobbles when coming to a stop. It showed obd code P0420.
    If I switch it off and on again, it then runs fine for a while but then happens again.
    Any suggestions?
    Thanks guys
     
  2. bisco

    bisco cookie crumbler

    Joined:
    May 11, 2005
    113,379
    51,596
    0
    Location:
    boston
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    what does that code stand for?
     
  3. bisco

    bisco cookie crumbler

    Joined:
    May 11, 2005
    113,379
    51,596
    0
    Location:
    boston
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
  4. BiomedO1

    BiomedO1 Senior Member

    Joined:
    Mar 27, 2021
    3,202
    1,699
    0
    Location:
    SacTown, Ca
    Vehicle:
    2021 Prius Prime
    Model:
    LE
    what was the reasoning behind changing the injector? How did you determine it was an injector fault?
    did you troubleshoot the misfire and/or did you get a P0301?
    how did the plugs look when you pulled them out?
    how many miles/km on the clock?
    how much oil burn between oil changes and at what interval?
     
  5. lexidium

    lexidium Active Member

    Joined:
    Nov 19, 2015
    294
    136
    0
    Location:
    manchester
    Vehicle:
    2008 Prius
    Model:
    N/A
    Yes. Had p301 so I changed the coils over and spark plug looked ok but fitted a new one anyway and misfire was still there.
    175,000 on the clock.
    oil is fine