The led brake light went fully out pretty much on the offside. I disconnected and reconnected it and it was good again. Next day it's almost fully out again. Anyone had this problem and fixed it without replacing the whole unit. Anyone bought the AliExpress ones and had success. Mines the black variant.
Sorry, need more information. Do you mean that you replaced the OEM incandescent bulbs with aftermarket LED bulbs? Now the brake and turn signals lamps are intermittent or flash quickly??? What happens when you put the OEM incandescent back in????????
they seem to be incandescence bulbs on this side of the pond; check for leaks and loose connections. I spray mine with contact cleaner and use dielectric grease them into the socket, so moisture can't get in there to mess with the conductivity. YouTube has videos on how to do this.
In gen 2, the taillight, side marker, turn signal/hazard, and back-up lights are replaceable bulbs. The stop, or brake, lights are LEDs built into the housing. They give that neat effect you can see in the photo in #3, where when the brake lights are off, that part of the combo light appears to match the dark glass across the hatch. The plastic lens isn't tinted or darkened at all, so the brake lights don't lose any brightness, but when they're off you're seeing the black surfaces below the reflectors. Then with the refresh in (2006, I think?) they gave up on that effect and made those surfaces silver instead of black.
