1. OldHatNewSaddle

    OldHatNewSaddle Junior Member

    Joined:
    Apr 24, 2018
    7
    0
    0
    Location:
    new mexico
    Vehicle:
    2014 Prius v wagon
    Model:
    Three
    Struggling to pin point a front end noise. In the last 20k miles I’ve replaced transmission mount with aftermarket. KYB aftermarket struts. Sway bar bushings OEM and end links moog. Lower control arms aftermarket. Tie rod ends OEM.

    The noise only happens on rough roads and washboards. Never on speed bumps or pot holes or flat roads.

    I can’t pick up any engine movement indicating engine mounts.

    replaced the KYB struts once due to a clunk after replacement. Fixed the clunk.

    sounds like metal on metal… with a crowbar I can’t get any play in the replaced parts.

    at a loss as to where to look next
     
  2. 2015V-BadHG

    2015V-BadHG New Member

    Joined:
    May 19, 2025
    24
    9
    0
    Location:
    Portsmouth NH
    Vehicle:
    2015 Prius v wagon
    Model:
    Three
    This sounds like either the upper strut mounts or more likely the sway bar links that are connected to the end of the sway bars vertically to the struts.
    Pete