Orange engine light and orange triangle on due to pulling and replacing under dash fuses

Discussion in 'Gen 2 Prius Care, Maintenance and Troubleshooting' started by Jack 84, Jul 23, 2026 at 6:11 PM.

  1. Jack 84

    Jack 84 New Member

    Joined:
    Today
    1
    1
    0
    Location:
    iowa city
    Vehicle:
    2010 Prius
    Model:
    II
    My engine light came on after I was testing for what circuit was causing a persistent cherp sound. In order to find the under dash fuse I left the accessory ignition on so I could hear the cherp sound. Now the warning triangle and engine light will not reset. No warning lights were on prior to this attempt and car was running fine. I'm wondering if there is a do it yourself way to reset. Any thoughts?
     
    #1 Jack 84, Jul 23, 2026 at 6:11 PM
    Tombukt2 likes this.
  2. ChapmanF

    ChapmanF Senior Member

    Joined:
    Mar 30, 2008
    28,677
    18,980
    0
    Location:
    Indiana, USA
    Vehicle:
    2010 Prius
    Model:
    IV
    The best way I can think of is the usual way: find out what codes the lights are telling you about first. Your activity might have caused one of the ECUs to think some kind of condition exists, and when you know what it thinks is happening, you have the best shot at resolving it.
     
    #2 ChapmanF, Jul 23, 2026 at 8:20 PM
  3. Tombukt2

    Tombukt2 Senior Member

    Joined:
    Nov 29, 2020
    13,830
    2,510
    0
    Location:
    Durham NC
    Vehicle:
    2009 Prius
    Model:
    Base
    Read the codes then clear them I guess you're saying you don't have a scanner in this day n age man.
     
    #3 Tombukt2, Jul 23, 2026 at 8:39 PM
(You must log in or sign up to post here.)