Separate names with a comma.
Read what the OP wrote in post #8. .
I recommend the Autel AP200. It is an OBD2 Bluetooth device that works with an Autel app on your phone or tablet. It costs about $60 on Amazon....
You need to use a scanner to read the trouble codes that your car is trying to tell you about. .
Ask your mechanic for a quote first. I am guessing it will be $2000 or higher.
LED low beam headlights make a big difference. Try it and see for yourself.
The hybrid cooling fan speed is NOT dependent on engine RPM or vehicle speed. It is only dependent on the temperature of the hybrid battery.
An easy way to test if the hybrid battery cooling fan is running is to use a tissue or piece of paper and place it on the intake vent. If the...
I did not see anything unusual in the two videos that you linked, except the resistance of the battery blocks are a little high ( 30 milli-ohms)....
The Autel app can be installed on more then one device. I have the app installed on my Android phone and on my Android tablet. If you do a scan...
Check the voltage of the 12v battery.
Did you remove the orange safety interlock plug from the hybrid battery? You need to use a good scanner to read the trouble codes.
Check again what sub-forum you are posting in. To me, it looks like a Gen 4 Prime.
You should be able to post a link now.
As already mentioned, you need a scanner that can read all the trouble codes. Look at post #1 and then scroll down to post #37 in this thread,...
You need 5 posts before you can add a link. You are now at 4 posts, so make one more, and then you can add the link in your 6th post. Did any of...
What you are experiencing is very unusual. I assume the dealership put in a new hybrid battery when they replaced it. These batteries should last...
I am curious how many miles you have on the car? Does it have the original hybrid battery? Did you get the P0A80 trouble code?
There is no alternator in a Prius. There is a DC to DC converter that is located inside the inverter assembly. It converts the high voltage...
The picture you posted, which shows 14.1V, just proves that the DC to DC converter is working properly when the car is in READY mode. It tells...
If the car does not turn off correctly, this is an indication that the combination meter is going bad. Take a look at this thread,...
