Separate names with a comma.
Attachments are working again! Check out this thread for more details and to report any other bugs.
It looks like powertrain control module is an SAE term and is used throughout the repair manual in SAE defined codes. Toyota does not give its...
I'm not sure that is correct. The Hybrid Vehicle Control ECU is variously referred to as the HV Control ECU and also HV ECU in the repair manual....
You can't really unless you're leaving the fob in the slot. You need to turn the car off in order to release the fob.
Near enough to the car would be 2 to 3 feet, and the car is smart enough to know whether the key is in the car or not. So, if you dropped the fob...
It might pay to look into why that is and fix it. Is the dash failing to light up, even if only intermittently? I don't understand this bit,...
I don't think you were ripped off. Just because the inverter rarely fails does not mean it never fails. It sounds like you have found a...
There should be a button in the left column that says something like Active Test. Click that and one should be the bleeding tests. I believe...
Both those codes (presuming "b" was an error) point to: Brake actuator assembly Skid control ECU Additionally the C1364 implicates the harness....
I believe the bleed procedure has to be done in IG-ON, not READY. How are you getting to IG-ON? Pressing the Power button twice with your foot...
Nice post. Nothing like cold hard data. I hope that you will post similar again in the future. Your effort is appreciated.
You won't necessarily get any warning light for a failed inverter coolant pump. The code that might pop up is for the inverter not cooling...
If all it took to fill the oil to the F mark (or at least somewhere in between the L and F marks) then your oil wasn't low enough to cause low...
Considering the OEM cat is CARB-compliant, I really don't understand your line of thought. Methinks your overthinking the whole thing.
Is the reason you are replacing the RFID chips that they are missing from the fob? There is no other reason to replace it otherwise. The RFID...
No, that is not milky and looks to be a little under 0.5 qt down which is fine for now.
I would venture to say you need to find a way – whether you beg, borrow, or beg again – to get hold of a better scan tool so you can do the brake...
The work you did when you replaced the 12 V battery 6 months ago.
You need to wipe the dipstick clean, put it back in, wait a few seconds then take it out again. As long as the oil level is between those two...
Can you disable the phone functionality if you have BT in the car already on this UGREEN device?
Yes, they are reliable, unlike some online (read eBay, FB marketplace) sources, this business has a brick-and-mortar shop with a reputation to...