Separate names with a comma.
Attachments are working again! Check out this thread for more details and to report any other bugs.
Playing it safe would have been to change the oil with regular Mobil 1 5W-30 (e. g.) and monitor the oil consumption for a month or two, topping...
I don't see where you say how many miles on this car, so unless you know for sure that this is an oil burner, I wouldn't start using high milage...
The MFD gets input from CM via the Gateway. Adds weight to the theory that something has not been reconnected or that something has become...
So do you know if this fob has ever worked to (remote or keyless) unlock/lock this car. I suspect the previous owner bought a secondhand fob and...
Yes Yes They are slightly longer, but as long as you replace all 38 modules (which is what you should do) it will work. Never heard of this...
Who'd a thunk! I'm continually amused by such statements of amazement. It seems obvious that if you fix what is broke it then will work. Not...
I presume you have this line in a file that you cut and paste. There is a typo, it should read FYI: Your posts ... Just thought I'd mention it as...
As you were new your posts were moderated. But now that you have more than 5 posts you should be good to go. Moderation is an unfortunate...
There is still a benefit to doing three discharges (with the second and third going down to 84V) but the third discharge is only going to be an...
I don't know if it regulations or just the local distributor's requirements but the Prii here have a very assertive horn very far away from a...
That might work for a while, but eventually, that capacitor will die and you will need to replace it. This post (#4) has a link to where you can...
3x charge/discharge followed by a final charge. !st discharge to 134V; 2nd discharge to 101V; final discharge to 84V.
That is why you do a top balance first. Get all the cells up to 100%. That is also why you do shallow discharge for the first charge/discharge...
What you are describing is equalizing, not balancing. It virtually does nothing for you and is really a waste of time. There is not enough of a...
You might want to look for a 2006 wiring diagram as that area of the car is different pre and post-facelift. Search the Gen 2 forums (using...
No need to do a flush. Just a drain and refill. It's just as easy as an engine oil change once you have your funnel and pipe (to fill from the...
Hi and welcome to PriusChat They are not magnets, they are RFID chips. It is what the reader in the key slot reads to enable the car to proceed...
I presume the "new" battery with the warranty was some flavor of rebuilt/remanufactured? If so, expect more of the same rinse and repeat in the...
More like 20-30 minutes before they are all finally asleep. The normal quiesced current is 16-24 mA.
The Aqua is the JDM version of the Prius c. Maybe you would get some good help by making a post in one of the Prius c forums.