Separate names with a comma.
Attachments are working again! Check out this thread for more details and to report any other bugs.
You will need Techstream or a good pro-level third party code reader that will read multiple make/model cars. The best source of "how to"...
After replacing your transaxle you are left with: the wire harness or connector the HV control ECU as problem areas, that is assuming the...
... unless the inverter is not being cooled properly. In that case, the inverter will lighten its load by shutting off the A/C until it cools...
No, it doesn't click. It just presses in and toggles the Cruise Control on and off. Your description of "spongey" sounds about right.
I haven't had the pleasure of doing this myself and nor can I remember any other posts of where anyone documented clearing clogging from the...
The important part between the dimples looks clean enough, why are you stressing about it?
Maybe an intermittent power supply? Have you checked the wiring?
^^ +1 to this.
Yeah, I was taught in a manual (stick-shift) (ahh. Remember those?) with the handbrake method (obviously). Great fun coordinating hand and two...
You have an existing fully functional SKS key fob, which you will use as the master, and you want to add a new SKS key fob to your 2007 Gen 2...
Nice work and great use of the diagnostic information. I appreciate you taking the time to document working your way through the inspection...
No, but you can use the parking brake, which is what you use to do a hill start. Plus this is a Gen 2 forum and the Gen 2 does not have HSA...
One slight variation, when starting, foot on brake, power up, put into D, apply a tiny amount of accelerator - just enough to hold the car...
As well as Door Control Receiver, but there are five oscillators (as they are called), one in each of the front doors, one behind the center...
You are not comparing apples with apples. Green Bean is a conglomerate of old used modules that may last a year or two longer. We have had...
No thermostat or sensor, but there is a fuse. The AM2 fuse.
... in one of the Gen 3 forums as your 2010 is a Gen 3, if the article ChapmanF's article does not solve your issue.
If it works the same way as a Gen 2, you wind the window down to halfway, then wind it back up except when it reaches the closed position hold the...
and I would add it is not to be recommended, for the same reason you wouldn't just buy a brand new module and stick it in. All modules should...
He just did: or to slightly expand that statement: All you need is to form-charge a module; that is, you need to charge it for 4 hours after...