Separate names with a comma.
Attachments are working again! Check out this thread for more details and to report any other bugs.
Maybe figure out where the water ingress is happening and see if you can seal it. I'm thinking of the wires and connectors here. If it is not...
Yup, overshadowed by the pressing need (at the time) to meet some CARB target or other. I guess they figured that they wouldn't fail. That is...
No, it was only the 2004-2005 years that had the issue with the combination meter that topped out at 299,999. Furthermore, it is the light...
Using this will actually cause you to have worse (higher) consumption (higher L/100 km/lower MPG). It is also very hard on the HV battery. Valid...
No, as I said the LED is installed from the factory in Gen 2's up to 2009. So anyone doing a retrofit only needs to add the stalk switch and...
Ok, that is making more sense. You have a JDM Gen 2 Anniversary Edition (I think it was called). This constantly trips us up as this model was...
Because the fuel sender and the fuel pump are inside the fuel bladder (Gen 2 only has the bladder) and the tank is therefore a sealed and...
No doubt the crack is contributory, but what I first notice is how bent out of shape the rubber bush is.
... tried a jump start, for example?
There is nothing to worry about here that a good charge up of the 12 V battery won't fix. Don't waste any more time on this, move on. If you do...
Have you or anybody "topped up" the 134a (a/c refrigerant) at any time? It may have the incorrect amount of refrigerant – either too much (from a...
You should be posting this in the "Gen 3 Prius Care, Maintenance and Troubleshooting " forum
This could indicate H2SO4 leakage from the old battery. NO. Under no circumstances. There is no need as the battery is designed with pressure...
In this regard, I wouldn't pay to much attention to the view of someone who does not have and never has had a Prius Gen 2. It can make a...
That will be a maximum, as the battery is charged the current will be tapered off. As far as the manual, there is a sticker applied to the OEM...
Um, no that is not great for a new battery – an AGM should be more like 13.2 V. So good that you are going to charge it.
I doubt that the broken drives matter. It is the cumulative total that is relevant. Make sure you put the new battery on your charger and make...
Couldn't tell you, I haven't needed to dig that deep in the battery as yet. Maybe @strawbrad, @TMR-JWAP, @ericbecky, or one of the others that...
No, it doesn't, the face of the duct should be parallel with the battery. See if you can also align the two bolt holes (on the squarish part of...
Umm, this thread concerns a Gen 2 and it is already established the correct spec for the drain bolt torque is 28 ft*ibs or 38 N*m.