Separate names with a comma.
Attachments are working again! Check out this thread for more details and to report any other bugs.
I believe so. As far as the rest goes, you are probably moving past my level of knowledge. Good luck with the testing.
It always pays to read the linked info, too. In step (b) it links to page 21–116, which is the sub-procedure that covers the Service Plug Grip...
Yup.
That is the FFD for the P0A90. If you have cleared the codes and the C1241 has not come back, then you will not have the data to look at, unless...
Are you sure you are looking at the freeze frame data (i. e. you clicked the snowflake icon), and not live data?
I suspect your code reader cannot read all the Prius ECUs, specifically the ones to do with the HV battery. You may need to get or borrow a more...
Also, put you battery on a charger over night to ensure it is fully charged.
It means the ABS/VSC/TRAC ECU detected a low (or less likely high) voltage on the B+. Look a the freeze frame data and look for the 12 V battery...
Even if that is true, it doesn't fix the problem. The source of the constant draw needs to be located and rectified, otherwise the OP will just...
How would the 12 V, bad or otherwise, cause these symptoms?
My reading is there is no mention of disconnecting the 12 V and it would make more sense to having the 12 V in place. On the high voltage side, at...
Do you have SKS and did you have the key fob with you when you walked up to the car? If you did you will not see the lowest current draw, as the...
I agree with Matt, too. If you are handy with electronics you can fix the combination meter (CM) yourself. Also, as you have a 2005, the CM in...
Load of tripe. Chasing goblins where there are none. Yes, it is common, nothing wrong at all, your gauge is working perfectly fine. This is...
Yes, it is, although after about 5 min some things shut down and the load goes to about 200 mA. With a door open the car will never fully quiesce....
You need to upgrade your scanner, as with your current scanner, you won't know what it can't see. You might as well not bother scanning the car...
That would suggest a ground isolation fault on the HV side. It is odd you don't see a code to that effect. Unless there are codes there your...
It is possible, albeit a final conclusion. The workup for this code/sub-code combination indicates the trouble areas to be Wire harness or...
You better dig out your paper work and get ready to make a warranty claim. It could be a normal response, if the codes causing the lights were HV...
Thanks for those, that clears that up. I had seen those both before and did not notice the 2 year descepency. I wonder what the serial number of...