Separate names with a comma.
Attachments are working again! Check out this thread for more details and to report any other bugs.
Try not to over think it. From what you have told us, your battery is in reasonable condition, so one less thing to worry about. Happy road trip.
You only need to disconnect it for a short time, 30 sec to 1 minute will do it. And yet some people report a marked change when they pick up...
It could also be that the family member from whom he inherited the car drove with less than an economical leanings and the engine settings were...
If you disconnected the 12 V (which you should have done to work on the brakes), it will have reset some engine parameters back to factory...
I've found if I need to "go now!" the best performance is not to floor the "go" pedal, but only give it a controlled press to 1/2 - 3/4 initially...
+1 on the Ctek 4.3.
You missed the final step — the handle then slides straight down vertically, until it clicks to indicate it is locked in. [ATTACH]
Thanks John, appreciate the time and effort you have taken in relying. Cheers.
You could check on the European Toyota Technical site* to see what is available. What you are after is the 4 DVD set of Europe maps (None of the...
Good to know. Enjoy the road trip. Do the resting voltage test the morning after you get there and see what it is, just out of interest. If ever...
I reckon you've got a few more years in that battery. Just make sure you charge it from time to time (once a month) if you don't drive it...
Not necessarily, how long did you run the test with the lights on and and did it hold the voltage at 11.9 V or was it continuing to drop?
If the maximum recommended pressure is 51 PSI, why are you contemplating 60 or 70 PSI? It seems you have a differing definition of maximum to me.
It may, or may not. Let's see what the load test shows.
It that just after you have turned the car off? I think it is, if so, repeat this test again after the car has sat without use for 2 hours or...
You may have a point, but if the brake fluid is "old and stagnant", would you not just do a brake flush after you've reassembled the brakes? Do...
With what are you checking the codes? You obviously have codes, it's just your reader is not seeing them, seeing as when you disconnect the...
Take a look at the first post in this thread: Belt change how-to with photos Although it about changing the serpentine belt, it shows quite...
@Beverly Gunter, post #24 has the answer.
Let's not put the cart before the horse. Let's take care of the 12 V battery first.