Separate names with a comma.
I almost forgot to mention the most important part of this whole project......Always disconnect the 12 volt battery before removing any parts,...
[ATTACH] In this pic you can see the 4 bolts holding the wheel bearing to the spindle. After carefully and gently prying out the CV boot dust cap...
I was trying hard not to mash up the mating surface of the spindle by using the air chisel.
It actually took longer to remove all the oxidation on the aluminum spindle with a drill and wire wheel then to remove the bearing from the...
I used wooden 4"x4" blocks to rest the aluminum spindle on while beating the snot out of it to remove the bearings but I saw a gentleman who...
Once the hub was separated from the bearing, I placed the spindle with the bearing still stuck inside on to a couple of pieces of wooden 4"x4"...
[ATTACH] Unfortunately I wound up with this 2 piece situation with the hub coming off but the bearing staying in the spindle. 190K miles and...
[ATTACH] I decided to go with the grade 8 bolt removal trick to see if it would work to pull the entire Hub and Bearing out of the Spindle. The...
First step was to remove the entire spindle from the vehicle. It seemed much easier to work on the removal of the Wheel bearing/hub with the...
[ATTACH] [ATTACH] [ATTACH] [ATTACH] Pics of the front suspension assembly before anything is removed. 190k miles has taken a toll. Just left click...
2005 gen 2 with 190,600 miles and the Front Wheel bearings started to howl. Not really too bad considering all 4 wheel bearings are original to...
I said I thought it was the best....NOT the least expensive!!! LOL
You can install a Pac amp pro and bypass the factory amp . It has both digital and optical outputs. See my post on this page Rick
OK let us know when you get it installed and if it helps with the noise, GOOD LUCK !!!
You are correct about Resonix being at the top of the food chain in sound treatment. Nick Apecella is the guy responsible for bringing the product...
Hey Dave, Did you ever get the new Ai-net cable and see if it helps with the noise interference ???
Glad you got the wine under control. Nothing more annoying than putting all the work and money into your system just to have that background...
Well...... That's why I mentioned the gain control levels my friend.
Please let us know if that resolves the noise issue
