Separate names with a comma.
So confirmed loss of coolant so how can I tell if its the block or the head with the failure. If head I will get a new one.
Well along with the oil cap I get water in the oil catch can about half fl oz and a little slime in the oil dipstick. Not to mention I changed the...
Intake? how would coolant enter the crank case from there? In any case can I use a 2017 prius prime engine? its still a 2ZRFXE. I hate when they...
see the pic you tell me, what do you think? I changed the head gasket and the oil and filter cleaned it and white stuff came back.
Not really sure I suspect the one time it overheated 20K miles ago it suffered a block or head damage. I am getting fluid in the oil Very little...
the title says it all if can recommend a place or tell me what year where the oil ring issue addressed in Prius gen3. IN addition what doe 7th and...
Yes I recall these. now is it burn fuel or oil this detects. I only ask because I recaptured my coolant when I change my oil pump last and there...
So I pulled the plugs and they are clean. I got the leak down test tool and used it to blow air into the cylinders and held it with a wrench as...
copy that. I got the tool for the job so I will do this tonight.
to confirm im thinking of connecting air compressor into the cylinder and see if I get bubles in the coolant tank. would this be a good test?
it half pulled appart already. what is the warp tolerance for the head to get it or not get it machined.
no white smoke going to pull the plugs today. Like I said I think this is super early as there is not rattle startup and barely any coolant gone...
So where can this goop be coming from its in the engine. all over the valve cover gasket in the oil dipstick. Coolant was low just slightly. I...
they dont warranty self install
I dont think so I would need to check doubt it, its been a year since I got it.
I dont have the tools for that. any other suggestions.
about 2k
Background. I upgraded my gen 3 for a gen 4 engine to avoid the head gasket issues. But here I am. so I got this engine JDM when I got it it had a...
how do I fix that like the actuator.
on defrost no issue blows fine on low or bottom seems fine just on vents on heat is weak. notice it got worse when its 36F outside. seems like...
