Separate names with a comma.
I just thought id ask as i would like a. more uniform style in the cabin, the one thing I DON’T like about this aftermarket switch is the ugly...
A lot of work to install? I had these on on 25 minutes…as for the light output on these aftermarkets, they are decent IMO, the brightness level...
Anyone with this knowledge? I cant believe no one has attempted this here LMAO
@dolj The sound is Def NOT coming from the rotors, they are clean and not rusted. It is generated from what could be behind the engine at bottom....
I officially took the prius out for a drive today and I drove about 50 ft away when I pressed on the brake and heard a grinding noise. It sounded...
I recently purchased a set of aftermarket fog lights from Amazon for my gen 2 (see photo of kit below) and read and saw how most everyone is...
The BCPS was not plugged in, I inserted the plug and code has gone away. The one I recall moving was the box attached to the positive cable not...
Old Thread but curious as to if the grounding of the BCPS or replacing it was the fix. I may have similar issue will check the ground part first
Thanks for the clarification. And, yes I had to remove this unit in order to remove the battery when I did. I recall plugging it back up but just...
Update: Went to the junkyard, got another motor temp sensor pigtail, removed the red wire along with the connector and installed it on my...
I have heard of it overheating if low on ATF or damaged if anything inside the transaxle is dislodged and damages it, not sure if that is so but...
Correct
I second @mr_guy_mann That is the location of the motor temp sensor plug. I just had the same code on a 2nd gen and found the red (pwr) wire of...
Thanks @Lam for this great workup post, successfully replaced my transaxle using some of your info.
Thanks @James Analytic for your input. I assume the code may be due to the damaged wire to the motor temp sensor itself as it would cause it to...
UPDATE: Well to my bittersweet advantage, I looked at the motor temp sensor 1 in the first image on post #58 and found the RED wire to be cut or...
These are the ones that show CURRENT: C1310 C1378 C2121 C2124 C2179 U0293 B1271 P0A2D also shows current and “History” Part of the work up to...
UPDATE: Finally finished the project. Installed it all back together and car is back up, started great and moves back and forth, I just cant test...
Solved either way, Turned out to be the spline on the shaft that was going into the transmission had damage to one of the lines or whatever you...
Not feasible when you're on a budget. I did some more research and found this video [MEDIA] I am going to try that with a new snap ring from parts...
