Separate names with a comma.
I am quite stuck, and in need of some wisdom. CONTEXT 2011 Gen3 Prius. I am replacing the sway bar bushings (see Mendel's shared PDF, pp 37-38)...
Thanks Mendel! Very helpful... mostly! Answer #1: yep, they say to remove the Front Lower Suspension Arm. HINTS: Before you begin, make sure...
THANKS! Yep, that is 100% gone on mine. :(
My (2011) hood support rod is rattling a LOT at the hinge (not the clip that holds it to the hood.) I am thinking there must have been some kind...
I'm a HW/SW/FW engineer myself. I understand circuits, but never have designed them professionally, working far more on the SW/FW side. That said,...
I'm replacing the sway bar bushings on my 2011 Prius. NONE of the online videos mention this catch-22. Searching here, I've seen hints that this...
Frustrated. KYB SM5840 has NO connection between the metal mounting plate and the spongy cushion below... so the cushion and protective tube...
Yep. That's one of the benefits of the 360 cameras. No longer even a slight issue!:)
Bought, not yet installed. :)
There's a bar down there. They call it a "rear suspension brace sub-assembly" probably not a real sway bar...
Umm... @PriusCamper I guess you've never looked at the back end shocks? There's no such thing as a fully assembled spring and strut for the rear...
OEM rear strut stuck in the metal sleeve at the top. Any good way to un-stick? In my photo, the strut on the left is stuck in the metal sleeve...
.
Doing my first DIY shocks/strut replace... ...and I am beginning to wonder if the typical "quick and easy" diagnostics are sufficient. Lots of...
Naw, just showing it. Already removed. Usually I could get one side to pop up by pushing in from the side, then pull in from the end...
Huh! Mine are different. But Mendel's trick worked. I used a sharp ice pick to pull one side at a time into the center hole. Not sure what part...
Any idea what the part number is? I haven't found this at Amayama etc :(
(I'm preparing to add some sound deadening to my Gen3 wheel wells.) As I clean the wheel wells, I noticed some things I've never seen before:...
My simple solution for "virtual reverse": I added a switch to the dash,in a blank spot next to the side view mirror controls. Switch OUT is...
Nope. Just A level II.
