Separate names with a comma.
I'm all for overpowering speakers vs. underpowering them. Given the speakers you listed, you should be able to get massive output from 2,000 Watts...
I think that the best way to be certain is to use the output from the factory amp as input for a pre-amp/processor (something like an MS-8, Bit...
No worries on the power from the battery...you could easily go up to 1,000 watts RMS before you need to worry. I say leave the factory amp because...
You would be best off to leave the factory JBL amp in place and use the output from it as inputs to the MS-8...rather than trying to get inputs...
The "D" model of the Hertz speaker (as I understand it) simply designates a dual voice coil speaker versus the standard single voice coil....
There are some 6x9 options out there with neodymium magnets that have shallow mounting depth and tiny magnets that would probably work in the...
Polyester fiber-fill (pillow stuffing) works well...you can pick some up at WalMart or any fabric store. Do not pack it full, rather loosely fill...
I'd say avoid the port idea. On an enclosure this small, designed for a small enclosure woofer, sealed will give much better frequency response. A...
There are tons of dealers in your area: Go to: UltimateLocator.com and type in your zip code. You should also follow my advice and see if there...
The factory front "subs" are 6"x9" oval speakers and the rear doors have 6.5" round speakers, so I don't think you can swap them without some...
"Excessive" in that the enclosure for two 15's takes up an impractical % of the space in the cab of a Prius. The output is a matter of...
Depending on how you wire the subs, if you're using the same amp and just adding subs, there should be no issue if the amp is drawing the same...
Poke around on DIYMA.com You should be able to find a member on that forum who's an Elettromedia (the makers of Hertz) distributor. They aren't...
I believe that the "D" version has dual voice coils....essentially the same as the single voice coil sub, but it will give you some options to go...
I'm not sure about the format of the digital signal. I've read about devices that let you jump into the signal path in a couple select German-made...
The short answer is "no" unfortunately. The signal coming from the factory head unit to the JBL amp under the passenger seat is a digital signal....
I can confirm that the JBL system has 8 separate channels coming off the amplifier to the 8 separate speakers.
Sometimes it's just easier to mount an amp to a board. It allows you to sink screws in more convenient places (than the amp flanges might...
Not sure how it stacks up depth-wise vs. the 10W6, but the Image Dynamics ID-Max 10" is a good alternative performance-wise.
Unless you want to totally replace the factory head unit and amplifier, I'm afraid it cannot be done.
