Separate names with a comma.
Its 103k km i.e., 73k miles. Its Prius v 2015.
I have read some threads in PriusChat on weired engine vibration and loud noise at very low SOC. When hybrid battery reached its minimum threshold...
Most of the time it was around 1000 before cleaning intake manifold and egr pipe. During cold, it barely fall below 13°C.
Thanks, I will check again all the hoses and switches are well connected soon. If problems persists, I will disconnect 12v battery.
Sure, I will check at weekend.
Yes, I am sure everything is plugged back. Only three gaskets one is steel gasket attached to the egr pipe and another two is rubber gaskets...
[MEDIA] My Prius Alpha 2015, Now 101k km. Its idle rpm around 1300 whereas it was around 1000 rpm before. I cleaned intake manifold and egr tube...
Other Prius Alpha users can varify it.
Its Japanese Prius Alpha 2015, 7 seater.
Torque pro notify me ECU not support mode $06.
T Thanks. Is it from Car Scanner or Torque pro?
Can anybody help me to set up custom PID for EGR Monitor using following data in Torque Pro app: MID:$31 TID:$bd - EGR Monitor Bank 1 Max:...
I chatted with car owner. He informed me nothing was happened like flooding the car or have any accidents. He disconnected 12v Battery and all the...
Not really.
On behalf post : Car is giving B2324 B2787, B2786, U0155, U0142 codes with knocking during shifting EV to engine. Does ecu is going bad?
Thanks for clarification. Actually, first I did fill initially higher than F line may be near B line, then start engine and run more than 10...
during my Water pump change I didn’t air bleed on maintenance mode. I did it with reserver cap off in engine running in ready mode for more...
Old pump rotor has cracked on its edge, picture attached . I installed new pump and so far so good. After erasing code, no check light and code....
I didn’t disconnect water pump switch during intake manifold cleaning. Today car was overheating and stalled on the road. Come to home with three...
Screen shot of freeze frame data. All are within range. Pump rpm not available on my scanner
