Separate names with a comma.
Copy that.. I've had and fixed this issue twice in the past on other Gen2's but I guess I didn't recall practically everything going dead. I'll...
IG ON (start button twice / no brake) I see CEL. Hold down brake and start button again I believe the car is switching into READY however I do not...
I haven't owned this prius long. I bought it for cheap with known brake issues and missing cat and have tried to replace the actuator with another...
The first two test drives were identical route 6 mile drives. I would get Cyl#1 misfires on code reader but no engine shake, etc... I let my wife...
Bad misfires on cylinder #4 on the third test drive of 20 miles. New Denso coils & plugs gapped to 1.0mm and the engine is now performing very...
Yeah.. right about at the 38s remaining mark is when mine gives up also.. Just like in the video from the OP. It seems it's sampling the pressures...
Ebay seller swiftly refunded me and said I didn't need to send it back... I ordered a different one and I'll slap that in and see if it works....
Copy.. I did actually bleed all wheels twice as well. On the second bleed the FR did manage to push out a tiny air pocket and I got excited that...
However you could be on to something the IG1 IG2 voltages in the freeze frame show 11.1V - I'll double check the 12V battery now. OK - I checked...
12V Battery is fully charged.. measuring 12.5V and 425CCA.
C1345 (Fail when trying to learn) C1368 (Seems like a freeze frame of data during learn process) Detail code "505" in the freeze frame data. The...
You are correct it is that part number.. "Fuel Vapor Feed Hose #1" - If the best price I can find is $29 before shipping I'll probably just use...
I have a 2010 and this hose had a 1/8" long split at the top where it connects to the metal pipe to the right of the valve cover. Upon trying to...
Sorry I haven’t checked this thread in a while. The rod was both bent and twisted. I replaced the rod and went with Corolla pistons and rings like...
They look good.. so do the rod bearings.
Correct. This started out as a head gasket replacement. Once I got the head off, the crank was at TDC and piston #4 was at the top of cylinder4...
I got the piston out and rod is both bent & twisted. Wasn't my fault at least since I bought it this way for cheap. To look at the glass half full...
piston: 13101-37240 rings: 13011-37260 rod: 13201-39185 The same as 2015 Prius and 1.8L Corolla
Useful reference thread: New piston design.? | PriusChat
I picked up a cheap 2010 with known head gasket issues. Head came off today and piston #1 doesn't reach the top of its cylinder so I definitely...
