Separate names with a comma.
I would change out the bushings. You will have to do an alignment after replacing them. You can buy aftermarket ones here....
Transmission problems are rare in these cars. Did the prior owner change the fluid and put in aftermarket ATF? As a cheap fix, you could drain and...
Where did you get the battery pack? Is it new cells or a rebuild?
This is a tangent, I do not mean to hijack the thread. You would think that Toyota would come up with software to monitor the EGR symptoms. A...
The original struts and shocks are made by KYB. You can get them directly cheaper than buying through a stealership. If you do not have a favorite...
It might be a good idea. There are 2 places to look for coolant in a Prius. The inverter has a separate coolant system. Try these @NutzAboutBolts...
Does this car have more power now with the replacement gen 4 engine?
It shouldn't be a problem. The transmission fluid in a CVT is for lubrication only. There is no hydraulic pump, no torque converter, and there are...
If an inspector failed your car, couldn't you hand him (or her) a bike pump and say go at it?
Do newbies have to bring a six pack of beer? I don't think that is for the transmission is it? I'd be tempted to come by but it is a six hour drive.
I would check for something loose in the suspension like a ball joint bolt or control arm bushing bolt.
Put the oil cleaner into the oil and run it in maintenance mode and then change the oil and filter. If you do not want to go to the trouble of...
I used Toyota branded products for several years and then changed over to Mobil1 oil and WIX filters. Toyota Part numbers were 04152-YZZA6 for the...
The issue I face is that I do not know if I did a 20 percent clean or an 80 percent clean. I got it clean enough to get the piston rings working...
oil cleaner twice and engine cleaner once
136000 miles
I have had some PMs asking about this. The original problem last year was high oil consumption, about a quart every 1000 miles. The first fix was...
I used the Sylvania kit on an old chevy last year. I wound up with a lot of the UV coating solution left over. If I have to do it again, I will do...
Here is the manual for the fuel pump replacement....
If your car does not maintain a stable toe in after it has been aligned, it may need new bushings on the front control arms. Don't let a shop tell...
