Separate names with a comma.
I did review that link prior to starting and related posts sharing the need for the X positioned. Videos were helpful on expected drag..where I...
Spring recognized for Gen 3 rear brake? Maybe from brake cable? I ran the car for about 2 miles w/no brake, albeit low speeds. Rotors all felt...
Request to move thread submitted
Thank you. Never consciously selected 2002 in the profile - that has been corrected. Also thought Gen 3 was elected for the forum.
Pulled the car in to start the front brakes and noticed a spring that I am presuming is from the rear passenger brake job. Anyone recognize?
Thank you for the link. Unable to hear anything direct, yet suspicious of back passenger side wheel. I will do the front today and then try the...
One of the more professional videos suggested spinning the rotor by hand so it spun freely and made no noises, rubbing or dragging sounds. No...
Thank you. It took some pressure and then was expecting the nut to be deeper when fully set, however turns out to be flush with the rubber edge..
Reading through the threads. Videos for this model showed needle nose players, c-clamps mostly and some with specialized compression tool. I am...
In the middle of the job and finding the c-clamp not budging the caliper piston. Sprayed it with WD-40…videos seem like it wouldn’t take a lot of...
update - there was not much pressure so I was able to slide it out....put the wood under...re-lifted and now both stands w/rubber guards.
Started the job this evening... topic still on lifting. Lifting the rear using the lifting point a few feet from the rear passenger tire lifted...
Correct - the topic shifted over and the thread stayed here... maybe a few cross links to help everyone. I purchased new rotors as backup - only...
Rotors - dealership seems to always recommend (require) machining rotors for a brake job. If doing brakes on one's own, how do you know if rotors...
@Mendel Leisk Mendel, you are such an active and detailed contributor to this forum - so appreciated.
Stability - didn't mean at the base where the wheels or jack touch the ground.... meant as it goes up in the air, the weight of the vehicle on the...
Looking at this diagram for the rear, it looks like the saddle needs to have direct contact w/the lifting point on the car. We would have rubber...
True true… always had rotations and oil changes done at the same time by the same chain. That chain pricing skyrocketed now (not all due to covid...
error - delete
Thank you for all the info. For the few times I’d ever need to lift the car (had the car since 2012, never lifted yet - always had a shop doing...
