Separate names with a comma.
I sent a note to Michelin and they said they don't have any. I wonder whey Michelin doesn't make more of them when they do their runs. They seem...
Does anyone know when in the past Michelin usually made their batches of Energy Saver A/S tires ? They seem to be out of stock in a lot of...
heyjack70, I don't know about the kick panel plug, but pictures of the headliner connector have the wires going to one side of the plug. The...
FrenchFry, The harness is mostly there :-). It is there from the radio to the headliner connector. In the other thread, Wes_33073 put a...
Lots of info on adding a camera can be found in the thread "backup camera for 2012 prius two - touch screen non nav" or something like that....
zebelkhan, It all depends on how close to a ground the orange wire really is. If you measure the voltage on the camera red and black wires, do...
The 2012 uses the radio touch screen to turn on/off some car options (ie smart key, etc). Can you still do that with the aftermarket units ?
zebelkhan, Not sure if you have completed your re-wring, but I'm not sure how easy it is going to be for you to get the camera ground attached...
SoCalBPrius, When I looked at a stock prius camera, the camera backing plate was a little smaller than the blank plate that comes with the car....
I measured the base plate of the two cameras last night. They are identical. Both are 49mm wide, 38 mm deep. The snap clips are 31 mm apart....
zebelkhan, I think Dan4500 or Willco figured out that you need to use the orange wire for the camera ground/return. The HU looks at that wire to...
SoCalBPrius, I'll have to check the two cameras again, but I think both fit the same in the D shaped cutout in the back hatch. I can measure...
Looking at that link, it looks like chenwenjiaoeb09 has changed the camera he is selling. It is no longer the "bathtub" camera and looks more like...
zebelkhan, Did you get a chance to move your regulator closer to the camera ? Did it fix your intermittent operational problems ?
sang kang, I think the reason it works is because the camera is "on" when ever the car is turned on, not just when the car is in reverse. If the...
KeinoDoggy, I've put the parts list for a 6v-3.3v regulator in an entry and also reviewed 2 cameras that people have used and worked. Since...
sang kang, I've seen two ways to do it. One, strip off the insulation and solder the bare wires together. The other is to buy some wire splice...
zebelkhan, I think I asked my EE friend about a heat sink and he said that it wasn't needed given that the voltage/current was so small. I'll...
zebelkhan, Hope you didn't break the budget ordering the parts :) You probably know this already, but you don't have to remove all the...
zebelkhan, Assuming the picture matches what you actually get sent, that looks like the same camera I got from the "chen" vendor and it was a...