Separate names with a comma.
i started using my fingers just now.... So I dismantled the whole connector and it looked really interesting. I didnt use Mr Sheen or anything...
I can't get that yellow clip lock, so I stuck a thin screw driver in there and pushed it in further but it didn't move. Anyway, I tested it as...
I can't figure out how to get this yellow lock out without snapping the whole thing
okay un-twisted the black connector - lets have some fun! I was referring to the bit where you were explaining what I should do once I've...
thanks for this John - i can sense victory is close... I dismantled the connector half way today, but then I got stuck at the yellow locking...
sorry - my mistake - on the last test, I didn't click the plastic tube right in there, i.e. it didn't separate the connection between the gold...
The multi-meter was crazy last night but I don't think I let the figures settle fully, and so i re-tested the airbag just now and after waiting...
I've ordered the connectors and will have to go pick them up at a local pick-up point tomorrow. Will pay £10 for them when i go to pick them up....
Just a thought, but I have a feeling that the guy before us also pin-pointed it down to the connectors and replaced them, hence why they have been...
hmmmm - another guy I just spoke to from a breaker yard said that if cables are broken and re-joined on these airbag systems, then the polarity is...
I've been calling around different breaker yards this morning and the majority of guys just recommend going straight to Toyota, and another couple...
thought so - yeh - was more of a brainstorming idea... I'll call a few local spares/breaker yard places tomorrow as shipping from the US is...
wow - you're good! okay - I'll order all of this stuff tomorrow. I had an idea a minute ago but i dont think it'll work - but here it goes...
have a look at the selection that comes up on ebay.co.uk when you enter the following (below)....shall i get a fresh pair of that whole yellow...
is there any other way to fit that connector on besides using a solder? I haven't done this type of thing in years I could attempt it but don't...
just tested it. I think my multi-meter may be alittle nutty... It never seems to settle on one value. I turned it to the 200 Ohm level and...
is there any risk of the airbag going off? shall i bring it indoors? I left it in the car just incase...
okay - just watched the video... i dont have any tubing that thin to slip onto the terminals for the second part of the test - any other way to...
ermmmm - basically, I pushed one end of the paperclip right into both tiny sockets, found on the black connector - i did push it in quite far back...
thought i'd upload a picture of the connectors on the airbag just for good measure... these airbag units looks quite expensive
