Separate names with a comma.
Good advice from your Cali mechanic... I would get something that meets your current needs. The Prius has resale value as is; waiting for...
I would get the Sylvania 9003 (H4) Basic halogen headlight bulbs. About $20 for two. They combine high and low beams in one three prong bulb....
$200 if you replace it yourself
You do have to be careful with some of the sound deadening which has an asphalt base as they can be sticky and will stain fabric and carpets.
A year and a half worth of it shakes violently combined with rust in a cylinder is quite conclusive. But hope seems to have squashed a head...
You are probably feeling the engine come on.
You should be ok.
Most likely the brake booster assembly (master cylinder) needs replacement. A common problem. See codes in attached
Blackj_myntrn continues to fool members here and the mod does not care.
I would say the red, green (with shield) would be the speed sensor cable. [ATTACH] [ATTACH] Will the car drive now?
Looks like Niagara Falls in there
You need to get clear well lite pics of this area. My guess it the wheel liner is gone and these are two cables merging into one probably...
When it comes to tires, Mendel refuses to fix his tpms or buy a new one. Now if they sold a Michelin with an integrated egr cooler he would...
Good install details JDM Engine in a US Prius? | PriusChat Look for X2ZR-W20 on the engine instead of the US engine’s X2ZR-W25. The injectors...
If you are going to do this yourself you need to define the wires involved. The first thing to do is jack up the car, remove the tire, light up...
Cylinder 4 did not look good on your dowel test earlier. Plus I have never seen a piston so steam cleaned. Must have been leaking for quite some...
Yes Toyota calls the circuit a speed sensor which is also the abs sensor. The same sensor is used to calculate vehicle speed and used for abs and...
I would not worry about it too much. This is not a tuned rf circuit. In fact the first couple of feet of the speed sensor itself does not have...
I would get a junkyard front speed sensor cable as long as reasonably possible and splice it in such that the spliced part was not flexing....
It can be done with good soldering, adhesive lined heat shrink and most of the shield coverage maintained. I would certainly try it. It's not...
