Separate names with a comma.
hybridautomotive.com There are models for Gen2 and Gen3 Prii from this vendor ( Jeff Sloan) JeffD
Errors happen. My wife still is angry at my dealer. He installed a rebuilt HV battery for me and it failed due to his not clicking home a...
The best OBD2 reader for a Prius is the MiniVCI (Requires MS Windows). Another option that is reasonable is Torque Pro ($5 plus an OBD2 interface...
We tend to keep cars until the cost of a repair/maintenance item exceeds the value of the car. Our 1997 Subaru was just retired at almost 300k...
Yes and "All-Weather" tires like the WRg3 have the snowflake symbol. I have them on my 2016 Prius and had their ancestors on my 2004 Prius for...
If you have good tires (Winter or all-weather - not all season), you can make it up a slippery slope, but I also would prefer AWD. Winter -...
How about adding another layer? JeffD
Both had oil burning issues. JeffD
The steering wheel has to rotate and the spiral cable winds around the steering column to allow rotation. All of the signals that are from (to)...
I think that you meant wired in parallel You should probably add that information to your product description. To use that 60 amp discharge...
Marketing pressure pushes the manufacturers to minimize the amount of periodic maintenance required as a sales feature. That is why Toyota says...
The little 12v battery charges in "ready" mode as Bisco indicated. JeffD
I have also periodically had this problem. Two days ago it happenned again and pressing the fuel button under the dash again fixed it for this...
Yes, but it is an automatic "smart" discharger which means that it is unlikely to discharge the HV battery too far (as long as the battery is...
Just one suggestion. The compressor is electrically driven so you need to use a specific AC oil (ND-11 or "Supercool") that does not conduct...
They are one and the same and you should do a drain and refill (Don't pay extra for a "flush" as it is not useful on a Prius.). My dealer charges...
PM jeff652 to get current information on his products. His old discharger was just a simple unit with two light bulbs. He has a new automatic...
Both filaments in parallel will draw a load current that is a large fraction of 6.5 amps - the rating of our 7.2 volt modules (called a 1C load)....
A higher load just works better. Our HV batteries can see loads of up to 130 amps (100 amps in older Gen2 Prii) in use. JeffD
You can load test individual modules ( a module has 6 internal cells) using an automotive halogen headlight (use both filaments) and measure the...
