Separate names with a comma.
what do you mean longer bolts in the hub? Do you mean use a longer bolt as nail and pound down into it onto the bearing-housing? only thing I...
UPDATE: How important is the dust-cover for the front-brake? Finally, managed to swap the bearings. Very difficult as much had not been likely...
UPDATE: The PB Blaster worked to get the 19mm nut off of the PartsPrius. It did take some force and started off very slowly but came off soon...
UPDATE: FIXED! Initially the wire broke while I was driving due my battery being unsecured with the bolts/clamps. Probably had been slowing...
thanks. Does it need to be fixed immediately or can I drive like 10 miles without this issue resolved?
thanks. I was hoping I could take it out of its housing to make sure its secure, but I'll try with needlenose pliers. Do you know what that...
There are two white housing that plug into the square thing that goes into the positive side of the 12V battery. The small white housing holds a...
thanks. Sounds like something out of NASA's manufacturing facility. Will look into it.
I've always managed to get by without an impact wrench (sooner or later) but I know Milwaukee makes good tools. One thing I don't like about them...
I was just about to go spray the nut again with PBblaster. I think the extractor arrives on Thursday. I need to buy an impact wrench so I...
I'll buy some and hopefully when the Amazon 19mm extractor gets here...it'll work. These kinds of problems are why car-repair is not practical or...
UPDATE: Still couldn't get nut off. We went to the auto-store, got a nut-cutter....and then the nut-cutter failed and the tip broke off. This...
say or think whatever you will. a gun is one of the few things in life whereby there are no substitutes when you actually might need one. hey...
Great thing about Gen 2 Prius is they don't get profiled to be pulled over in the first place. I need to get out and shoot more but anytime the...
Well for starters, once I caught a guy underneath my car in a store's parking lot. He quickly left as soon as saw him but mumbled something about...
Not really an update but should you choose to keep a gun in the "secret compartment" in the armrest, here is an updated pic. Made a foam cutout...
tried already rocking back and forth. I hate when working on a car ONE SINGLE THING keeps you from progressing. This driver Prius has around...
All I know is the first thing I thought about this morning when I woke up was using a short 19mm wrench and then using a hydraulic foot carjack to...
I've tried that. I used a 3ft breaker bar...damn thing won't move. Also I plan on replacing the axle as long as I am replacing the bearing (the...
Yes. thank you. I mean the knuckle that is attached to the shock/control arm. Hopefully if I can just swap the knuckle over it will be sufficient.
