Separate names with a comma.
Got the timing cover resealed and put back on. [IMG] [IMG] I noticed the crankshaft seal does not close around the crankshaft perfectly. I...
I am so mad. I wanted to reseal the timing cover so it could sit over the weekend. The Ultra Grey I bought must of been old, it would not come out...
Cleaning off the timing cover is a giant pain in the rear. No chemical seems to melt the RTV. I tried 5 different ones. Not to mention digging it...
[IMG] Is this better?
Is this lip or shelf on the inside of the edge of the cover supposed to serve as a "guide" of where to place RTV? [IMG]
Here's the old one with a little over 200,000 miles on it. You can see it has started to wear. [IMG] Looks like either a casting issue, or...
HondaBond 4 or HT? How many oz will I need? Also, prob a dumb question, but to keep from missing the mark and sliding some off due to limited...
Any good recommendations for a timing cover sealant?
I took the timing cover off and the chain. I did notice the VVT-i timing gear was not lined back up right, so I'm thinking it might be bad as...
I poke around in my phone since I always take a ton of pics. Here's another pic of the engine timing. It should be between the link rivets, yes? [IMG]
It may look off in that pic, but trust me, I spent a long time revolving that engine around to make sure the marks kept lining back up. The code...
I might have found one issue. Here is a before and after, after swapping crankshaft sensors. [ATTACH] [IMG] The peaks of the previous sensor...
[IMG] [IMG] I'm showing 16v on the crankshaft sensor and the proper 5v reference on the cam. This...does not seem right?
Does the ECU only send the 5v signal to the crankshaft sensor once ignition is detected? I did not have everything together last night to fully...
This is not making any sense. I took a pic of the cams lined up. [IMG] The default orientation of the phaser is aligned with the the markings on...
I'm wondering if perhaps the timing gear or what is called the "cam phaser" has messed up? [IMG] This is a photo of the timing before the engine...
00-19 Timing Chain Kit For Scion Toyota Echo 1.5L L4 DOHC 16v DNJ TK949 | eBay
Well the factory service manual only states 2 things for P0016: 1. Engine out of time (physically) 2. Replace ECM. I found a used ECM for my year...
Here is the pulley set to 0 (well as close as I could get it). [IMG] and the marks. [IMG]
Well it appears to be in time then. I have no clue what else it could be other than a bad cam phaser?
