Separate names with a comma.
The best internal resistance I have seen Techstream read is .018. Good is .019 to .023. A reading of .031 is very bad. The worse I have heard of....
If you do not already own a Mini VCI cable get one on Ebay or Amazon. The cable will come with Techstream software. You must have a decent scanner...
Here is some clarification with pictures of my last test. Two 7/64" holes were drilled in the module top. My syringe has a 1/8" needle which makes...
I have results from adding just 9ml per module of distilled water. The first module had a capacity of 3043 mAh before and 6280 mAh after...
For glue I am going to ty JB Weld Plastic Bonder Syringe. It claims to bond polypropylene. Do not confuse it with JB Weld Plasticweld Syringe, it...
Roy, way to jump in and participate. You have made a big investment in re-hydrating a whole pack at once. We now have John adding KOH, me adding...
The pressure gauge has a 3/8" brass pipe fitting. A hole was drilled in the module. I screwed the gauge in without tapping threads. After...
Please! Share more info on your attempt to re-hydrate modules. Even failures, or maybe mostly failures are valuable learning experiences. Brad I...
[ATTACH] This is what is left of the Gen II module that I had peeled back the side of the case. This module had blown off part of its top while...
Since re-hydration is starting to spread to other threads I would like to add to The Electric Me's concerns. First is that re-hydration is an...
Try Hometown Hybrids.
I tried one more charge and discharge cycle on my topless module today. I used a different charger that had a delta V lower limit of 3mv per cell...
The 6.5 amps was the charge rate. I did not monitor the cycles. Since the last charge was 6658 mAh at 6.5 amp rate the charge would have taken...
John, I just measured the free air space capacity of a module at 53 ml to cover the plates and 75 ml to the top of the cells. Per cell this is 8.8...
I suggest that what Jeff K meant was he used 30 ml per module. A careful reading of his post shows he did not specify 30 ml per cell or module. I...
For the discharge test make sure the car is warmed up so you at least have a chance to keep the gas engine off. It might also help to clear the...
I disagree. The HV battery is one series string of 28 modules. The modules are not grouped in to pairs. They do not work together as pairs. They...
The stupid thing is these cars do not come with a 5 digit display from a $2 calculator that would just display the codes.(n) Before you get your...
I have a 2006 that had the dash go out 9 years and one day from the date placed in service. Toyota said no.:mad:
[ATTACH] John, have you tested the normal maximum operating pressure of a non re-hydrated module? We know that modules rarely vent. So it...
