Separate names with a comma.
FYI, a Toyota dealership will not replace individual hybrid battery modules. That is Toyota's policy. They only replace the complete hybrid...
Usually, the HV battery cooling fan will turn on full speed when a problem is detected with the HV battery. The red triangle light (master...
No, I have not done any brake bleeding with the Autel AP200 or with Techstream. I hope that I never need to replace the Brake Booster in my 2011...
The Autel AP200 is my recommendation. It can communicate with all 22 or so ECUs in a Gen 2 Prius. What that means is that it is capable of...
Trouble code P0301 means the misfire is from cylinder #1. Trouble code P0302 means the misfire is from cylinder #2. Trouble code P0303 means the...
11.8v is low after you charged it. Did you charge it for about 12 hours? Do you know how old the battery is? If you do not know, maybe you can...
The shop supplies fee is for siphoning more money out of the customer's pocket.
There are many different sellers on eBay, not just one. Adjust your search text to find more. Edit, I checked three or four weeks ago, and there...
Correct, you and a lot of other people. That is the reason you see used Nexcell lithium battery modules listed on eBay for sale. NexPower did not...
Virginia is not very cold climate. The Prius BMS was designed for a NiMH battery. It was not designed for a lithium battery. No matter what...
I would leave it on for another 8 hours since it is only a 2 amp charger. After you remove the charger, let the car sit for a few hours, then...
Save you money and use it towards a used Prius Prime.
What engine water pump did you buy as a replacement? Toyota OEM or aftermarket? Was the engine overheating before you replaced the water pump?...
Used NexPower (Nexcell) Lithium battery modules are available for sale on eBay. That will be the short-term fix until another module goes bad....
The P0A08 seems to be the code to be concerned about. The short description of that code is DC/DC Converter Status Circuit. I do not think that...
I edited my post #12 a little. Please look at it again.
14v in Ready is good. That means the DC/DC converter inside the inverter assembly is working properly. Do not clear any codes yet. Can you use...
Yes, 11.0v is low. What voltage do you see when the car is Ready (on)? Do you own a 12v battery charger?
Do you own a volt meter??? See post #2. You could have a bad inverter assembly or a blown fuse. If so, buying a new 12v battery would be a waste...
If you have a volt meter, use it to measure the 12v battery. Check at the battery terminals and at the jump point under the hood with the car...
