Separate names with a comma.
The only trouble code that I have seen so far is in post #5, which was C1355. I believe that code will turn on the red triangle. Maybe someone...
You have provided a very nice description of the history of your Prius. One of the most important pieces of information that you have not provided...
I use the Autel AP200. Take a look at post #37 in this thread Gen2 OBD2 app review, and also this thread Autel Maxi AP200 - go buy this . The INF...
I bought parts for the front left on Amazon. Linked below are the two parts I purchased. Parts N Go Prius Front Fender Liner Left Driver Side LH...
Does your Gen 2 Prius have the smart key system? There are two different battery sizes. A smaller battery if the car does not have the smart key,...
I replaced the front left fender liner in August 2024 with a generic one bought on Amazon for $28. It took a while to install correctly, but it...
It explains a lot, but it does not explain what is causing the misfires in your car's engine. You or your mechanic needs to diagnose what is...
What are the INF codes (sub-codes) that you have with the P0AA6 code?
Is this Dr Prius data taken after or before you did the grid charging and discharging cycles? Besides blocks #2 and #14 being bad, blocks #9 and...
I am glad to hear that your mechanic found the problem. Most mechanics would not have found that it was the exhaust heat recovery system that was...
Take a look at this thread, https://priuschat.com/index.php?posts/3360511 How many miles on the car?
No
What do you mean by "the freeze frame at 26A"? Do you mean the Dr Prius app data? That is not the freeze frame data. You need to look at the...
Did you buy a new or used part?
The freeze frame data for the P0A80 code will show the voltages of all 14 battery blocks when the code was triggered. Using that information,...
I just read your post again. The problem was not the orange safety interlock plug since your car went to Ready and the engine started. Sorry for...
Yes, those are the three steps. When you do the last step, make sure you slide the lever with force.
Odds are that you did not install the orange safety interlock plug correctly. There are three steps to install the plug correctly.
Which water pump did you replace? The engine water pump or inverter water pump?
That confirms that there is a bad connection between the 12v battery and the front fuse box. It could be the negative or positive connections.
