Separate names with a comma.
Does the airflow from the dash vents change when it stops cooling? What you describe sounds like evaporator freeze-up. The system gets too cold...
While there are a number of differences between the Gen3 & Gen4 brakes, the basic "it uses the pump and accumulator to run everything" is common...
I looked on amazon - most of the autel Maxiscan series of tools appear to be OBD2 based. They retrieve codes and data from the ECM (engine...
It depends. In many states an inspection facility MUST test the car "as presented". Sounds stupid but that's the letter of the law. The shop can...
I do not have an "early" Gen 2 (2004-2005). They have somewhat different emissions systems than my 2006. Either your car does not have the oxygen...
You have the red triangle warning light - what codes do you have? .
Again, that valve in the back with 3 ports is the "switching" valve. Just get the correct part. The third valve (canister close or "vent" valve)...
Just be aware, there are 3 solenoid valves on the 2004-2005 system. Toyota (and scantool engineers) are wonderfully inconsistent in nomenclature....
Could be something like the axle having a damaged tooth on the "tone ring" that triggers the ABS wheel speed sensor. (or the wrong number of...
The only information I have from the owner's manual is that icon indicates a fault with something in the hybrid drive system. Usually I would...
Yes, that's correct. The one (center) pivot "drives" the right wiper arm, while the second (far right) pivot just guides it. That pivot should...
What was the amount of (key off) current that Toyota measured on your car? .
On a Gen 4, you can use a capable scantool to look at data from the various ecu's. One of them has data for key off draw. Posted via the...
My service info states that C14DF sets when "power source voltage for the linear solenoid is 16V or more for longer than 0.8 seconds". Sounds...
I think that he means you should have 2 or more keys for your car. It doesn't take much for "only having 1 key" to become "no keys". Posted via...
What does the condenser look like - what is the condition of the fins? If the fins are corroded and crumbling (or clogged with dirt or debris),...
Does your scantool have bidirectional controls? It's easy to test that solenoid valve if you can tell the ECM to turn it on and off. A common...
The Autel AP200 "should" be able to program sensor ID numbers into the TPMS ecu, but I have not gotten that function to work. Tried it a couple...
1) careful (but violent) use of the largest prybar that I get into position between the inner joint and transmission 2) gentle (steady) use of a...
Not really. You can't change beliefs with a few words. I said what I needed to in post 3. That and I've wasted too much time to use crap AM...
