Separate names with a comma.
Are you experiencing overheating problems with your car? Otherwise, draining and replacing the coolant every 100k miles (using Toyota's SLLC)...
The CEL on our Gen 2 is coming on every couple of weeks with a P0420, but then it will turn off on its own again a few days later. Our winter...
With this additional piece of information, it would definitely behoove you to check voltage at the front jump points before doing anything else....
Yes, even if the car won't go to Ready mode, if you put it in IG-ON mode (2 Pushes of the Power button without your foot on the brake), you should...
Are you saying it won't go to Ready mode? Do all the lights on the dash come on? What device are you using to try to read the codes? I believe...
Ok, a 1.71V difference is definitely enough to trigger a code and it's clear that one of the modules in Block 8 needs to be refurbished or...
Block 8 would be the most likely candidate, based on the graph in your screen shot, but there should be at least one other code (P3018) to go...
I have no clue what that could be, but do you have a way to read any Diagnostic Trouble Codes? The Check Engine Light, at least, should have...
Until you have 5 posts in this forum, you cannot attach any files. In the meantime, I suggest you post your video on a 3rd party website such as...
There are only a couple of reasons that I can think of that may make you want to continue to take your car to your Toyota dealer after the free...
Have you checked your oil level lately? Low oil pressure seems to be one of the more common causes of intermittent red triangles on these older Prii.
For block order see @TMR-JWAP's Post #3 in this thread.
I'm guessing your engine had a misfire, which may not have been enough to light up the Check Engine Light (or possibly it did, but you have not...
As little as $62 on Amazon.com. I know which screws the OP is referring to. I had the same problem the first time I changed the bulbs on our Gen...
