Separate names with a comma.
I see you're in California but in between inspections no issues . Choices
Who cares if it throws a cell you'll be able to drive your car until you sort all Out . Unless you have a state inspection next week
Old Corollas same that foam is shiet. I guess trick is never touch . It's like headliner foam
Very normal behavior mine drops from a full load of green Parked to half blue 50 feet down driveway . But comes right back up immediately on the...
Fastest way I found to tell in my generation too is literally to crack the two bolts rock rail listen for squirting fuel . You can tell by the...
Got dislodged during crunch hemostats may pull it out in pieces . No issues with that
Tweak it in place .
And what have we learned with all,? That after you put a load on the battery it takes a few seconds to possibly 30 seconds for recovery . Yep the...
Look at you're old cat on way out of car see at the front wer exhaust first hits honeycomb. Look for clogging plugging. Hold up to sun look into...
You shall more than likely have no trouble getting the car home . At all . Maybe if you blow a tire and you don't have the mini spare
Worcester Massachusetts the good ole concert venue. Is the car rusted like mass cars are ?? I would think you would want to have a capable scanner...
I don't know man I guess it could be a location thing maybe people are beating on the bearings to put them in when they don't need to who knows ....
Yes and built-in slop once it's buried in water it'll all be otay. Lotta parts out of boxes might do similar . Product in the world that's...
https://www.facebook.com/share/p/16kQPW1tkC/ Picture of the nonsense I'm talking about
Yes do that too same bolts size as push thru method . But some y'all have it so bad 60 bux cleaned up units from Detroit Axle mite be a thing ....
Just went out to the shop took a generation to HUB flipped it over and I'm looking at the four bolts that hold the hub to the aluminum hub blast 4...
Yes that too . Is a fine method but make up two rods . The bolts holding bearing in get long ones at tractor supply like 3.5 inches put two in...
In my generation too I can drive without it in 100° weather I'm usually not on hi way running svc calls did gor a year not an issue at all
And now if you touch the hood release lever there's nothing but play so mechanical are undone ? Rust belt car ? Damaged front end as in noticable ?
If the foam wears off of the damper door on its sealing area clunk could be
