Separate names with a comma.
Yes and built-in slop once it's buried in water it'll all be otay. Lotta parts out of boxes might do similar . Product in the world that's...
https://www.facebook.com/share/p/16kQPW1tkC/ Picture of the nonsense I'm talking about
Yes do that too same bolts size as push thru method . But some y'all have it so bad 60 bux cleaned up units from Detroit Axle mite be a thing ....
Just went out to the shop took a generation to HUB flipped it over and I'm looking at the four bolts that hold the hub to the aluminum hub blast 4...
Yes that too . Is a fine method but make up two rods . The bolts holding bearing in get long ones at tractor supply like 3.5 inches put two in...
In my generation too I can drive without it in 100° weather I'm usually not on hi way running svc calls did gor a year not an issue at all
And now if you touch the hood release lever there's nothing but play so mechanical are undone ? Rust belt car ? Damaged front end as in noticable ?
If the foam wears off of the damper door on its sealing area clunk could be
longer bolts in hub and beat on bolt heads . I've air hammers too never used on this yet
I UK car you have changes le EFI pump I would think twould be the standard design 2 in diameter about 5 inches long barb to barb ? Sock on one end .
You would physically as with you're eyes look from inverter thru firewall to the ECU near in the rack of ecu's looking for chew marks burnt...
There are 12 volt low and medium flow coolant pumps available from major mfgrs smaller easier to fit w 5/8 barbs in proper orientation
Welcome to the wonders of stored electrical energy as we know it as batteries . These numbers bounce around every 15 minutes every cycling of the...
do not know never used my sawzall goes thru all of em in short order. not that valuable anymore just put a sticker on the car that says the converter is...
I use long 45 degree needle nose pliers grab and rotate sets the clamp.open . I replace zebra or equal . Better clamps on mine
There's a guy named Scott floating around here who has the whole manual available online I suggest look into it you have the big bucks for the 5...
Oh the hybrid isolation code first thing use cheapo scanner and clear codes twice back to back . Will the car ready now? Drive it stay close if...
If it's the damper door hunting no it's just irritating. But for some reason I don't think this is the problem
This is all actuator control and that lil pump looking thing on pass side firewall . I believe is rear brake pump or control.
What's this hid ? I see adjust motors in pic I think gen3 hid? Usually it's h8 and h 11. And the bulb ends look like car grey plug doh. Tell me...
