Separate names with a comma.
Positive and negative terminals in that battery seem to be the wrong way around for gen 2 Prius! You can’t install the battery backwards in the...
If the bearing is really corroded you just have to remove the knuckle. Bearing just won’t come out with slide hammer. You would probably just get...
Brake disc to hub fitment? Did you clean the rust and junk from inside the brake disks? Just a peace of sandpaper works well for this.
All of the codes with freeze frames seem to have very low 12V system voltage. So there’s a good change that replacing the 12V battery would fix...
Report us in the future if the problem comes back or doesn’t.
Option 3. Is piston soak method. You just pour the cleaner into the cylinder from spark plug hole and let it seep through the piston rings into...
That’s very bad. Why would they check how much oil is in the engine before changing it? So your engine could be using a lots of oil and get...
I don’t think the bolt is simply removable. If that’s the picture from your Prius it doesn’t look bad. Just use a thread chaser (thread die) to go...
Don’t grease bas bars before installing them! That can very easily cause bad connection. And as it’s hard to grease after install normally they...
KYB is the OEM manufacturer so that’s generally the best option. In rear shocks (sometimes called struts) on rear should be enough if the springs...
I understood that now terramir replaced the pump and noticed that coolant doesn’t flow because system is blocked. Testing if the fault code will...
This thread: Help....inverter coolant not flowing even after pump change | PriusChat has picture of coolant flow in inverter cooling loop. Looking...
If you can’t get it to ready first check the service pug in hybrid battery. Most of people forget to do the slide part at the end that tells the...
Probably only if brakes are served (cleaned and lubricated) otherwise they can get stuck and wear unevenly or even start dragging and wear fast.
Maybe somebody or an electronic repair shop could fix your old key? At least temporary fix it? That way you could use it to program in the new...
In this topic: 2006 Prius Inverter ( It's Not the Inverter) | PriusChat there still seems to be the original 12V battery in place:
Part of the air intake system as cyberpriusII already posted. It’s normal for that end peace that you did circle (that’s not in the cyberpriusII...
Did you try the key button? If it started when replacing the key battery then maybe the key was somehow damaged? Or just somehow not working? Try...
Try to turn the smart key system SKS off and on again with key button under the steering wheel. Button out is SKS turned on.
Normally people envy the other way around. It’s hard to dress for something like -30c or -22F… And with cold weather you get road salt so...
