Separate names with a comma.
Lots of space on large commercial vehicles - less of a problem putting on more pieces. Waste Management changed over to all CNG powered garbage...
Never seen a CNG hybrid. The people up the street have (or at least had, have not seen it recently) the CNG variant of the Honda Civic, which...
So you're saying there was no pressure/flow at the ABS outlet port for that line? That would seem to narrow it down to the ABS. Except...
More details on what the mechanic did please. Did he verify a clear tube all the way from the ABS unit to the brakes? Did he try hooking up up a...
That hole is in the rear bumper cover? If water were to leak in there is there any chance it could migrate to a spot where it would cause...
Thanks.
The AP200 free support is for one car model or one car make? Just to be specific, would it only be configured for our 2nd Generation Prius or...
Could the Colman propane tank be replaced with a few brass pipe fittings screwed together, with only a few CC of volume inside? What is the...
On our 2007 the MFD display can take a while to catch up with reality. Often when we come to a stop light we hear the ICE turn off, and those...
The manual tells you what the car should do when it is working normally. The purpose of the experiment is (besides not opening the manual, also)...
Are you sure the car is completely stopped when the shift is made? It wouldn't surprise me if the car has some sort of safety which prevents...
I suggest before going whole hog on a headlight first try washing it thoroughly with some Dawn, then lightly polishing it (I have some ancient...
Even after that it still might not hold, and it really should. At one point we discovered that the drum brakes on our 2007 wouldn't hold on a...
This is the method I used for this bottom up refill. For whatever reason it left a lot of air in the heat storage tank but not elsewhere....
True, also not true. If the bladder wasn't there the evap system would be so much simpler (see the pix of the Japanese vs. USA tanks I posted...
I suspect the problem with pressurizing the bladder to expand it is that it can break some connection inside the tank. The bladder itself may or...
Hurt the metal? No. The paint, maybe. Part of what a hood liner does is to insulate the hood from the heat of the motor. My daughter grossly...
I did it that way too, with minor changes. There were about two quarts of air trapped in the CHS tank. That burped out easily with the "short...
The state government loves to create bureaucratic nightmares, so of course the implementations of our emission laws are thick with that. On the...
Last time I opened mine there was quite a bit of brake dust. They didn't look like your picture until after all of that was removed.
