Separate names with a comma.
Good question. And THANK YOU for digging in with me on this! Here's a new picture from the side w/ the right front wheel off. 100% of the wettish...
Hybrid Pitstop replaced my entire engine (with a Gold 2015 rebuilt from ground up) only 30k miles ago. Is that a likely gasket leak so quickly?
@PriusCamper your wish came true, unfortunately. ;) I'm suddenly seeing a pool of wet on the garage floor after each of the last couple of...
Meee too! The only thing I can think of is that the nut was supposed to be welded in place. A bad weld there would only affect those who try to...
The job is done. Whew... Here's what I ultimately did: 1. I have no piece of metal rod that can work it's way to jam against the nut. 2. I am...
Great questions... Yes, absolutely spins. And yes, confirmed it is loose in there. I kinda assumed I need to remove more stuff... but don't see...
Looks like the correct part is 90480-15025. Many chinese knockoffs, and a few OEM offers. ;)
I am quite stuck, and in need of some wisdom. CONTEXT 2011 Gen3 Prius. I am replacing the sway bar bushings (see Mendel's shared PDF, pp 37-38)...
Thanks Mendel! Very helpful... mostly! Answer #1: yep, they say to remove the Front Lower Suspension Arm. HINTS: Before you begin, make sure...
THANKS! Yep, that is 100% gone on mine. :(
My (2011) hood support rod is rattling a LOT at the hinge (not the clip that holds it to the hood.) I am thinking there must have been some kind...
I'm a HW/SW/FW engineer myself. I understand circuits, but never have designed them professionally, working far more on the SW/FW side. That said,...
I'm replacing the sway bar bushings on my 2011 Prius. NONE of the online videos mention this catch-22. Searching here, I've seen hints that this...
Frustrated. KYB SM5840 has NO connection between the metal mounting plate and the spongy cushion below... so the cushion and protective tube...
Yep. That's one of the benefits of the 360 cameras. No longer even a slight issue!:)
Bought, not yet installed. :)
There's a bar down there. They call it a "rear suspension brace sub-assembly" probably not a real sway bar...
Umm... @PriusCamper I guess you've never looked at the back end shocks? There's no such thing as a fully assembled spring and strut for the rear...
OEM rear strut stuck in the metal sleeve at the top. Any good way to un-stick? In my photo, the strut on the left is stuck in the metal sleeve...
.
