Separate names with a comma.
C1345 (Fail when trying to learn) C1368 (Seems like a freeze frame of data during learn process) Detail code "505" in the freeze frame data. The...
You are correct it is that part number.. "Fuel Vapor Feed Hose #1" - If the best price I can find is $29 before shipping I'll probably just use...
I have a 2010 and this hose had a 1/8" long split at the top where it connects to the metal pipe to the right of the valve cover. Upon trying to...
Sorry I haven’t checked this thread in a while. The rod was both bent and twisted. I replaced the rod and went with Corolla pistons and rings like...
They look good.. so do the rod bearings.
Correct. This started out as a head gasket replacement. Once I got the head off, the crank was at TDC and piston #4 was at the top of cylinder4...
I got the piston out and rod is both bent & twisted. Wasn't my fault at least since I bought it this way for cheap. To look at the glass half full...
piston: 13101-37240 rings: 13011-37260 rod: 13201-39185 The same as 2015 Prius and 1.8L Corolla
Useful reference thread: New piston design.? | PriusChat
I picked up a cheap 2010 with known head gasket issues. Head came off today and piston #1 doesn't reach the top of its cylinder so I definitely...
iOS "Car Scanner" - Car Scanner ELM OBD2 on the App Store Other symptoms: Turn car on and not ready just a yellow led on the start...
I picked up a fixer-upper prius with known problematic hybrid drive issues. I replaced the bad/underperforming modules in the hybrid pack and...
[MEDIA] It was quite an effort but so far so good. I've driven in on two ~4 mile trips on surface streets I haven't braved an expressway yet....
Update: NOT the timing chain. Noise is due to the dreaded "Piston #3" with broken skirt and slapping. I haven't gotten the pistons out of the...
I'm certain this is just worn out timing chain slap! Timing chain kit on order.. new guides, sprockets, chain, tensioner, etc on order. Looking...
Yes, that's what I wrote in post #13: "Service manual: Standard compression pressure: 128psi, min 99psi, max delta between cylinders: 14psi" And...
Here's the Gen2 manual page regarding compression testing: https://photos.app.goo.gl/E7tSLvm8BrbnG48d9 When I spun the engine with a drill there...
From my last post it would seem the sound only happens with compression. I tried starting the engine with one spark plug completely removed and...
The noise is very present in idle & in park. If I want to run it with valve cover off I can put the car in maintenance mode which just essentially...
Stethoscope on order with a-prime.. I should get it tomorrow. I would like to include the information that as of a month ago I did start noticing...
