Separate names with a comma.
Does anyone have any ideas on getting the stripped bleeder fastener off? It’s the one that comes out with the #6 T handle. Stripped 2 trying to...
That’s pretty accurate! In this case I had (2) of them things and stripped them both. Maybe it’s time to finally give GripEdge brand a shot...
If I have to take that wheel off one more time… lol Sorry if I came off brash guys, I just stripped the #6 trying to open the bleeder valve and...
Thanks for the reply Chapman. As has also been mentioned a couple times, respectfully, this is pump number 3. Using the unfused jumper resulted...
All I did was run it as per the photo, I didn’t adjust nodes or anything else because it went over my head. Is that ok? Do I just run it 15...
it’s the moron trying to bleed his heat storage tank pump Can I speak with you here? I was hoping you could just explain what I should do...
Allllrighty boys, I’ve got an update. I sent it for half a second, coolant went down and pump turned on I did have a little spark. Chapman,...
It My bad, it’s the one on the right side of the engine that you put a #6 allen down to open from the top, not the visible one that takes a #10...
Thanks again for helping out! Ok, so I’ve changed all 3 pumps at this point (OEM Toyota) The pump in question is the one you mentioned, the heat...
Also wanted to add my multimeter is cheapish, but it does have a fuse
I’m trying to accomplish the method in this video because the car has other issues and would like to do this without it running. Are you saying...
I’m not mechanically inclined just asking people around here, toyota and watching youtube. One thing toyota said is if you use a jumper cable it...
Thank you for the reply! Got gnarly sparking when trying the jumper wire last time… and since this is the 3rd time replacing the same pump (2...
He uses a 10amp connection but mine is 15amp, that should be fine right? He also says something about continuous mode?
Hi! Can anyone help me out? I have a brain injury and it’s hard to digest manuals. I’m trying to manually bleed the coolant in my prius as per...
I really appreciate all of the info! Unfortunately I obtained a brain injury almost 2 years ago and this stuff is a little too complicated for me...
That was very kind of you to provide that much info on Christmas, you’re good people. Thanks Pasadena!
Thank you! Do you have any info on how to apply the voltage to the pump for testing? Merry Christmas!
Issue: Coolant Heat Storage Tank Pump was making terrible noises. Heater worked fine but car was giving OBDII Code: P2601 Coolant Pump "A" Control...
You might want to double check your procedure, your car has several air bleeder valves and Toyota techs do utilize them when doing this job. I...
