Separate names with a comma.
I replaced mine about 4 years ago with a similar aftermarket cat. It lasted about 13 months before the P0420 code. I then installed a spacer on...
Hmm, are you sure that part is a fake? My Denso O2 sensor had an all black cable cover too. It's not unusual for the parts to differ in appearance...
That's part of the function needed when one replaces the brake actuator and completes the brake bleed. If you're promoting this unit, it is...
Yeah, I do recall having some issues but in the end I was able to complete the procedure. The biggest issue I had was installing Techstream on my...
Does it have the linear solenoid relearn function?
That's my thought process too - I replaced the Cat yesterday and I've ordered a new downstream O2 sensor. Then, I'll just wait and see if P0606...
I replaced my brake actuator pump and completed the brake bleed procedure with Techstream and a minivci cable (cheapo one from Aliexpress) - I'm...
Can it do the brake bleed procedure?
Driving home last night and the check engine light came on. Torque app pulled code P0606 ECM/PCM code and a pending P0137 o2 sensor Circuit Low...
Only consider keeping if you're able to install both yourself. Also note that replacing the brake actuator is very difficult and time consuming if...
Yes, definitely check first! If you need a CARB compliant CAT, just go the spacer route.
Hey Lezlie, Do you still have the original CAT installed? If so, easy decision.. just sell it for scrap and buy a cheap aftermarket version. I...
Successful bleed! Here's what I did: 1: Without connecting the 12V, I performed a manual brake bleed - got some air/fluid out of the front. 2:...
Tom, I read a thread where you said you purchased an AP200 Scanner. Can that scanner do a full brake bleed?
Also, as mentioned in my other post, I connected the front brake lines and left the top line loose. But when I added fluid, I didn't see anything...
Tom, It's difficult to read your instructions but I think you're saying the following: 1: Connect the 12V. Remove the relays. Turn the car on?...
Yeah, I just can't find good step by step instructions. I'm hoping someone here can outline the procedure and answer some of my questions. If I...
For the life of me, I'm unable to find a video that shows a Prius Gen 2 brake bleed with Techstream. Furthermore, when I search this forum for...
New (well used) unit is in! I found it more difficult to get the replacement in compared with removing the old unit - most people seem to have the...
You were actually one of the sources that seemed to indicate Thinkdiag was confusing, "ThinkDiag works but their language translation makes it...
