Separate names with a comma.
Interesting! AFAIK, I can talk to ECU's on all CAN busses from any one of them... are they truly separate busses? As for the confusion... I just...
Definitely NOT the hose *clamp* (which goes at the end of the hose.) Those tie straps look interesting, but obviously not the same -- these allow...
For now: treating everything as minor. Did a bit of tightening, cleaned MAF sensor etc, Going to beat up the car this week, and hopefully it'll be...
I think the engine wetness/shiny is separate from the pool of watery liquid on the concrete. Gonna treat it that way at least.
If it were not so aggravating, this would be an interesting puzzle Neither I my my dealer parts dept can find the diagram for this, let alone the...
That is what I am starting to think. My question about that: *where* does condensate drain? I thought it was in the front next to radiator/fans.
Interesting. From the link below (sub-figures "C" and "D"), looks like those are "Plug, w/ Taper Head Screw" -- just a bolt that does nothing?!...
Good question. And THANK YOU for digging in with me on this! Here's a new picture from the side w/ the right front wheel off. 100% of the wettish...
Hybrid Pitstop replaced my entire engine (with a Gold 2015 rebuilt from ground up) only 30k miles ago. Is that a likely gasket leak so quickly?
@PriusCamper your wish came true, unfortunately. ;) I'm suddenly seeing a pool of wet on the garage floor after each of the last couple of...
Meee too! The only thing I can think of is that the nut was supposed to be welded in place. A bad weld there would only affect those who try to...
The job is done. Whew... Here's what I ultimately did: 1. I have no piece of metal rod that can work it's way to jam against the nut. 2. I am...
Great questions... Yes, absolutely spins. And yes, confirmed it is loose in there. I kinda assumed I need to remove more stuff... but don't see...
Looks like the correct part is 90480-15025. Many chinese knockoffs, and a few OEM offers. ;)
I am quite stuck, and in need of some wisdom. CONTEXT 2011 Gen3 Prius. I am replacing the sway bar bushings (see Mendel's shared PDF, pp 37-38)...
Thanks Mendel! Very helpful... mostly! Answer #1: yep, they say to remove the Front Lower Suspension Arm. HINTS: Before you begin, make sure...
THANKS! Yep, that is 100% gone on mine. :(
My (2011) hood support rod is rattling a LOT at the hinge (not the clip that holds it to the hood.) I am thinking there must have been some kind...
I'm a HW/SW/FW engineer myself. I understand circuits, but never have designed them professionally, working far more on the SW/FW side. That said,...
I'm replacing the sway bar bushings on my 2011 Prius. NONE of the online videos mention this catch-22. Searching here, I've seen hints that this...
