Separate names with a comma.
Frustrated. KYB SM5840 has NO connection between the metal mounting plate and the spongy cushion below... so the cushion and protective tube...
Yep. That's one of the benefits of the 360 cameras. No longer even a slight issue!:)
Bought, not yet installed. :)
There's a bar down there. They call it a "rear suspension brace sub-assembly" probably not a real sway bar...
Umm... @PriusCamper I guess you've never looked at the back end shocks? There's no such thing as a fully assembled spring and strut for the rear...
OEM rear strut stuck in the metal sleeve at the top. Any good way to un-stick? In my photo, the strut on the left is stuck in the metal sleeve...
.
Doing my first DIY shocks/strut replace... ...and I am beginning to wonder if the typical "quick and easy" diagnostics are sufficient. Lots of...
Naw, just showing it. Already removed. Usually I could get one side to pop up by pushing in from the side, then pull in from the end...
Huh! Mine are different. But Mendel's trick worked. I used a sharp ice pick to pull one side at a time into the center hole. Not sure what part...
Any idea what the part number is? I haven't found this at Amayama etc :(
(I'm preparing to add some sound deadening to my Gen3 wheel wells.) As I clean the wheel wells, I noticed some things I've never seen before:...
My simple solution for "virtual reverse": I added a switch to the dash,in a blank spot next to the side view mirror controls. Switch OUT is...
Nope. Just A level II.
We are traveling through Canada for a while. Distances and fuel are all metric. I pushed the km/h button,and the speedometer changed... But avg...
@ChapmanF FTW :) Something chewed through the O2 sensor signal (blue) and ground (white) wire insulation. No wonder getting wet caused issues!...
(@PriusCamper LOL... have I really been posting about this droopy thing? I willingly admit, I have a finely tuned forgettory, so it's possible....
Also got a response from my local many-decades ASE mechanic friend (usually too busy to respond but this question got him going!) He strongly...
(oops)
The main engine shield is drooping in front of the oil pain. AFAIK, there aren't supposed to be any clips holding it up My guess: as long as the...
